Plant watering system
Excse·plant-watering-system·pcb/pcb.kicad_pcb
About the Plant watering system PCB
Plant watering system is an open source PCB design by Excse, published on GitHub. It is a 2-layer board measuring 99.7 × 99.7 mm, with 50 components from 35 distinct parts.
Other key parts include the TPS63802DLAT, TUSB320LIRWBR, BQ24075RGTR and ESP-32S DevBoard. By type, the board carries 20 resistors, 11 capacitors, 5 connectors, 5 diodes, 4 ICs and 3 transistors.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
A completely selfmade smart watering system for plants of any kind integrated into HomeAssistant
A self-contained plant pot that waters plants automatically and connects to Home Assistant over Wi-Fi. The project brings together custom ESP32 firmware, a custom PCB, and purpose-designed pots with the water reservoir, sensors, pump, and electronics inside.
Development checklist · Getting started · Firmware guide · Schematic · PCB previews
The pot is intended to take care of routine watering while keeping everything in one unit:

Main components on the Plant watering system
Plant watering system bill of materials (BOM)
50 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS63802DLAT | TPS63802DLAT | IC1 |
| 1 | TUSB320LIRWBR | TUSB320LIRWBR | IC2 |
| 1 | BQ24075RGTR | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | ESP-32S DevBoard | ESP-32S_USB-C_CH340_DevBoard | U2 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | AO3401A | SOT-23 | Q2 |
| 1 | AO3400A | SOT-23 | Q3 |
| 1 | USB_C_PowerOnly | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Soil_Sensor | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Pump | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P1.00mm_Vertical | J4 |
| 1 | Water_Sensor | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Battery_Cell | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 2 | LED | LED_D4.0mm | D1, D2 |
| 1 | SMAJ6.0A | D_SMA_Handsoldering | D3 |
| 1 | D_Schottky | D_SMA_Handsoldering | D4 |
| 1 | PESD5V0S2BT-QR | PESD5V0S2BTQR | D5 |
| 1 | 0.47uH | L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1 |
| 3 | 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5 |
| 5 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C7, C8, C9, C10 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 100uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 900k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 2 | 47k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R9 |
| 2 | 1.5k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R16 |
| 1 | 2.2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 1.62k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 56.2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 511k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 91k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 4 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13, R18, R19 |
| 3 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R17, R20 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
Plant watering system design files
The KiCad project lives in the Excse/plant-watering-system repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/pcb.kicad_pcb
- Schematicpcb/pcb.kicad_sch
Plant watering system: common questions
How big is the Plant watering system PCB?
The Plant watering system measures 99.7 × 99.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plant watering system?
50 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plant watering system design files?
From the Excse/plant-watering-system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Plant watering system design in my own project?
The repository has no license, so all rights stay with Excse. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k