Proyecto Chaleco 7mo 3ra
exequiel000·Proyecto-Chaleco·HARDWARE/Versión JLC/Proyecto Chaleco 7mo 3ra.kicad_pcb
About the Proyecto Chaleco 7mo 3ra PCB
Proyecto Chaleco 7mo 3ra is an open source ESP32 PCB design by exequiel000, published on GitHub. It is a 2-layer board measuring 60.5 × 36.5 mm, with 24 components from 20 distinct parts.
Its main chip is the ESP-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 connectors, 6 resistors, 4 capacitors, 3 switches, 2 ICs and 1 transistor.
Main components on the Proyecto Chaleco 7mo 3ra
Proyecto Chaleco 7mo 3ra bill of materials (BOM)
24 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | ESP-WROOM-32 | MODULE_ESP-WROOM-32 | U5 |
| 1 | Q_NPN_BEC | SOT-23 | Q1 |
| 1 | Ds18b20 | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | MPU-6050 | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Max30102 | PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | Motor | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | BAT 3,7 3000 mAh | BORNERA2_AZUL | J5 |
| 1 | USB | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Buzzer | MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | SW_SPST | BORNERA2_AZUL | SW1 |
| 1 | EN | SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | BOOT | SW_SPST_CK_RS282G05A3 | SW4 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 2 | 20uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
Proyecto Chaleco 7mo 3ra design files
The KiCad project lives in the exequiel000/Proyecto-Chaleco repository on GitHub; these links point at the commit this page was built from.
Proyecto Chaleco 7mo 3ra: common questions
What microcontroller does the Proyecto Chaleco 7mo 3ra use?
The Proyecto Chaleco 7mo 3ra is built around the ESP-WROOM-32, from the ESP32 family.
How big is the Proyecto Chaleco 7mo 3ra PCB?
The Proyecto Chaleco 7mo 3ra measures 60.5 × 36.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Proyecto Chaleco 7mo 3ra?
24 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Proyecto Chaleco 7mo 3ra design files?
From the exequiel000/Proyecto-Chaleco repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Proyecto Chaleco 7mo 3ra design in my own project?
The repository has no license, so all rights stay with exequiel000. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Proyecto Chaleco 7mo 3ra without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Proyecto-Chaleco
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k