RCS Hardware
explosion33·sarprcs·Flight_Computer/RCS_Hardware.kicad_pcb
About the RCS Hardware PCB
RCS Hardware is an open source STM32 PCB design by explosion33, published on GitHub. It is a 2-layer board measuring 60 × 52 mm, with 47 components from 26 distinct parts.
Its main chip is the STM32F401CCU6, from the STM32 family. Other key parts include the AMS1117-3.3, BNO055, W25Q32JVSS and MPU-6050. By type, the board carries 24 capacitors, 7 resistors, 5 ICs, 3 connectors, 3 diodes and 2 crystals.
From the project
2023-2024 SARP RCS Controls / Electronics repository

Main components on the RCS Hardware
RCS Hardware bill of materials (BOM)
47 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401CCU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | BNO055 | LGA-28_5.2x3.8mm_P0.5mm | U4 |
| 1 | W25Q32JVSS | SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U6 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768Mhz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J2 |
| 1 | 5V | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | J4 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 2 | SPI | PinHeader_1x08_P2.54mm_Vertical | SPI1, SPI2 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 9 | 100nF | C_0402_1005Metric | C1, C5, C6, C7, C8, C15, C16, C20 +1 |
| 2 | 10pF | C_0402_1005Metric | C2, C3 |
| 1 | 10uF | C_0402_1005Metric | C4 |
| 2 | 10nF | C_0402_1005Metric | C9, C25 |
| 2 | 1uF | C_0402_1005Metric | C10, C11 |
| 1 | 2.2uF | C_0402_1005Metric | C12 |
| 2 | 22uF | C_0805_2012Metric | C13, C14 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22pF | C_0402_1005Metric | C17, C18 |
| 2 | 0.1uF | C_0402_1005Metric | C21, C24 |
| 1 | 2.2nF | C_0402_1005Metric | C22 |
| 2 | 5.11k | R_0402_1005Metric | R1, R2 |
| 3 | 1k | R_0402_1005Metric | R3, R8, R9 |
| 2 | 10k | R_0402_1005Metric | R4, R7 |
RCS Hardware design files
The KiCad project lives in the explosion33/sarprcs repository on GitHub; these links point at the commit this page was built from.
RCS Hardware: common questions
What microcontroller does the RCS Hardware use?
The RCS Hardware is built around the STM32F401CCU6, from the STM32 family.
How big is the RCS Hardware PCB?
The RCS Hardware measures 60 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RCS Hardware?
47 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the RCS Hardware design files?
From the explosion33/sarprcs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RCS Hardware design in my own project?
The repository has no license, so all rights stay with explosion33. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RCS Hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in sarprcs
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k