CONTROLLER Throttle
About the CONTROLLER Throttle PCB
CONTROLLER Throttle is an open source PCB design by Exprezz0, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 47 × 68 mm, with 48 components from 20 distinct parts.
Other key parts include the C72120 and TCA9554PWR. By type, the board carries 18 resistors, 12 transistors, 12 connectors, 3 capacitors, 2 ICs and 1 switch.
From the project
Based on OpenHornet design - Modified for Personal Use.
The purpose of this guide is to help enable the end-user to successfully accomplish the following: 1: Facilitate navigation of the file structure. 2: Provide clarification regarding the manufacturing process of PCB's related to OpenHornet using JLCPCB.com 2: How to install KiCad 6 and set up libraries associated with OpenHornet. (optional)__
Note: Manufacturing files have been generated accordinging to JLCPCB.com guidelines. If choosing a different PCB Manufacturer, make sure to research their formatting standards and modify the necessary manufacturing files accordingly. And if you choose to…
Main components on the CONTROLLER Throttle
CONTROLLER Throttle bill of materials (BOM)
48 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C72120 ProMicro | DIP-24_W15.24mm_Socket | U1 |
| 1 | TCA9554PWR | TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 6 | IRFB3206PBF | TO-220-3_Vertical | Q1, Q3, Q5, Q6, Q9, Q10 |
| 6 | IRLML6402TRPBF | SOT-23 | Q2, Q4, Q7, Q8, Q11, Q12 |
| 1 | C265105 X/OUTB | JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J1 |
| 1 | C265105 Y/INB | JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J2 |
| 1 | C265105 Z/AUX | JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J3 |
| 1 | C157993 INB GRIP | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 1 | C131334 OUTB GRIP | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | C131339 INB LIMIT | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | C131339 OUTB LIMIT | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | C131337 EXT +5V | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
| 1 | C131337 IDLE DETENT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 1 | C131337 MAX DETENT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J10 |
| 1 | C131339 IN SERVO | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J11 |
| 1 | C131339 OUT SERVO | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J12 |
| 1 | C318884 RESET | SMD-SW-4_5.1x5.1 | SW1 |
| 1 | 47UF 47uF | C_1206_3216Metric | C1 |
| 2 | 10UF 10uF | C_1206_3216Metric | C2, C3 |
| 18 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +10 |
CONTROLLER Throttle design files
The KiCad project lives in the Exprezz0/F-18C_Simulator repository on GitHub; these links point at the commit this page was built from.
CONTROLLER Throttle: common questions
How big is the CONTROLLER Throttle PCB?
The CONTROLLER Throttle measures 47 × 68 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CONTROLLER Throttle?
48 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CONTROLLER Throttle design files?
From the Exprezz0/F-18C_Simulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CONTROLLER Throttle design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in F-18C_Simulator
DDI
158.2 × 167.4 mm79 parts2LCC-BY-NC-4.014
AMPCD
162.9 × 178.9 mm78 parts2LCC-BY-NC-4.014
Ifei
165.1 × 120.7 mm45 parts2LCC-BY-NC-4.014
UFC Main
168 × 110 mm44 parts2LCC-BY-NC-4.014
GAUGE Dual Needle Instruments
54.6 × 39.2 mm43 parts4LCC-BY-NC-4.014
ABSIS NANO GENERAL I/O
105.2 × 42.4 mm41 parts2LCC-BY-NC-4.014
ABSIS ATX Power Supply Unit
144.4 × 71.1 mm39 parts4LCC-BY-NC-4.014
EYEBROW WARNING INDICATOR LEFT
96.1 × 78.8 mm34 parts2LCC-BY-NC-4.014
ABSIS Backlight Controller
101.6 × 53.3 mm22 parts2LCC-BY-NC-4.014
AVR/ArduinoCONTROLLER Standby Instrument
99.1 × 71.1 mm14 parts2LCC-BY-NC-4.014
ABSIS Mega
99.1 × 53.3 mm10 parts2LCC-BY-NC-4.014