Ifei
About the Ifei PCB
Ifei is an open source PCB design by Exprezz0, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 165.1 × 120.7 mm, with 45 components from 7 distinct parts.
By type, the board carries 39 diodes and 6 switches.
From the project
Based on OpenHornet design - Modified for Personal Use.
The purpose of this guide is to help enable the end-user to successfully accomplish the following: 1: Facilitate navigation of the file structure. 2: Provide clarification regarding the manufacturing process of PCB's related to OpenHornet using JLCPCB.com 2: How to install KiCad 6 and set up libraries associated with OpenHornet. (optional)__
Note: Manufacturing files have been generated accordinging to JLCPCB.com guidelines. If choosing a different PCB Manufacturer, make sure to research their formatting standards and modify the necessary manufacturing files accordingly. And if you choose to…
Ifei bill of materials (BOM)
45 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MODE | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | QTY | SW_TH_Tactile_Omron_B3F-10xx | SW2 |
| 1 | UP | SW_TH_Tactile_Omron_B3F-10xx | SW3 |
| 1 | DOWN | SW_TH_Tactile_Omron_B3F-10xx | SW4 |
| 1 | ZONE | SW_TH_Tactile_Omron_B3F-10xx | SW5 |
| 1 | ET | SW_TH_Tactile_Omron_B3F-10xx | SW6 |
| 39 | LED | WS2812-2020 | D1, D2, D3, D4, D5, D6, D7, D8 +31 |
Ifei design files
The KiCad project lives in the Exprezz0/F-18C_Simulator repository on GitHub; these links point at the commit this page was built from.
Ifei: common questions
How big is the Ifei PCB?
The Ifei measures 165.1 × 120.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ifei?
45 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ifei design files?
From the Exprezz0/F-18C_Simulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ifei design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in F-18C_Simulator
DDI
158.2 × 167.4 mm79 parts2LCC-BY-NC-4.014
AMPCD
162.9 × 178.9 mm78 parts2LCC-BY-NC-4.014
CONTROLLER Throttle
47 × 68 mm48 parts2LCC-BY-NC-4.014
UFC Main
168 × 110 mm44 parts2LCC-BY-NC-4.014
GAUGE Dual Needle Instruments
54.6 × 39.2 mm43 parts4LCC-BY-NC-4.014
ABSIS NANO GENERAL I/O
105.2 × 42.4 mm41 parts2LCC-BY-NC-4.014
ABSIS ATX Power Supply Unit
144.4 × 71.1 mm39 parts4LCC-BY-NC-4.014
EYEBROW WARNING INDICATOR LEFT
96.1 × 78.8 mm34 parts2LCC-BY-NC-4.014
ABSIS Backlight Controller
101.6 × 53.3 mm22 parts2LCC-BY-NC-4.014
AVR/ArduinoCONTROLLER Standby Instrument
99.1 × 71.1 mm14 parts2LCC-BY-NC-4.014
ABSIS Mega
99.1 × 53.3 mm10 parts2LCC-BY-NC-4.014