ABSIS NANO GENERAL I/O
About the ABSIS NANO GENERAL I/O PCB
ABSIS NANO GENERAL I/O is an open source PCB design by Exprezz0, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 105.2 × 42.4 mm, with 41 components from 9 distinct parts.
By type, the board carries 33 diodes, 5 switches and 1 resistor.
From the project
Based on OpenHornet design - Modified for Personal Use.
The purpose of this guide is to help enable the end-user to successfully accomplish the following: 1: Facilitate navigation of the file structure. 2: Provide clarification regarding the manufacturing process of PCB's related to OpenHornet using JLCPCB.com 2: How to install KiCad 6 and set up libraries associated with OpenHornet. (optional)__
Note: Manufacturing files have been generated accordinging to JLCPCB.com guidelines. If choosing a different PCB Manufacturer, make sure to research their formatting standards and modify the necessary manufacturing files accordingly. And if you choose to…
ABSIS NANO GENERAL I/O bill of materials (BOM)
41 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AUDIO | Bourns_3310Y | RV1 |
| 1 | DMR | Bourns_3310Y | RV2 |
| 1 | BIT | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | OFFSET | SW_TH_Tactile_Omron_B3F-10xx | SW2 |
| 1 | SPECIAL | SW_TH_Tactile_Omron_B3F-10xx | SW3 |
| 1 | LIMIT | SW_TH_Tactile_Omron_B3F-10xx | SW4 |
| 1 | POWER | SW_TH_Tactile_Omron_B3F-10xx | SW5 |
| 33 | LED | WS2812-2020 | D2, D3, D4, D5, D6, D7, D8, D9 +25 |
| 1 | R | R_0603_1608Metric | R1 |
ABSIS NANO GENERAL I/O design files
The KiCad project lives in the Exprezz0/F-18C_Simulator repository on GitHub; these links point at the commit this page was built from.
ABSIS NANO GENERAL I/O: common questions
How big is the ABSIS NANO GENERAL I/O PCB?
The ABSIS NANO GENERAL I/O measures 105.2 × 42.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ABSIS NANO GENERAL I/O?
41 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ABSIS NANO GENERAL I/O design files?
From the Exprezz0/F-18C_Simulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ABSIS NANO GENERAL I/O design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in F-18C_Simulator
DDI
158.2 × 167.4 mm79 parts2LCC-BY-NC-4.014
AMPCD
162.9 × 178.9 mm78 parts2LCC-BY-NC-4.014
CONTROLLER Throttle
47 × 68 mm48 parts2LCC-BY-NC-4.014
Ifei
165.1 × 120.7 mm45 parts2LCC-BY-NC-4.014
UFC Main
168 × 110 mm44 parts2LCC-BY-NC-4.014
GAUGE Dual Needle Instruments
54.6 × 39.2 mm43 parts4LCC-BY-NC-4.014
ABSIS ATX Power Supply Unit
144.4 × 71.1 mm39 parts4LCC-BY-NC-4.014
EYEBROW WARNING INDICATOR LEFT
96.1 × 78.8 mm34 parts2LCC-BY-NC-4.014
ABSIS Backlight Controller
101.6 × 53.3 mm22 parts2LCC-BY-NC-4.014
AVR/ArduinoCONTROLLER Standby Instrument
99.1 × 71.1 mm14 parts2LCC-BY-NC-4.014
ABSIS Mega
99.1 × 53.3 mm10 parts2LCC-BY-NC-4.014