UFC Main
About the UFC Main PCB
UFC Main is an open source PCB design by Exprezz0, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 168 × 110 mm, with 44 components from 24 distinct parts.
Other key parts include the HT1621B, GN1640T, AW9523BTQR and TXS0108EPW. By type, the board carries 11 resistors, 10 capacitors, 9 ICs, 9 connectors and 4 test points.
From the project
Based on OpenHornet design - Modified for Personal Use.
The purpose of this guide is to help enable the end-user to successfully accomplish the following: 1: Facilitate navigation of the file structure. 2: Provide clarification regarding the manufacturing process of PCB's related to OpenHornet using JLCPCB.com 2: How to install KiCad 6 and set up libraries associated with OpenHornet. (optional)__
Note: Manufacturing files have been generated accordinging to JLCPCB.com guidelines. If choosing a different PCB Manufacturer, make sure to research their formatting standards and modify the necessary manufacturing files accordingly. And if you choose to…
Main components on the UFC Main
UFC Main bill of materials (BOM)
44 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HT1621B | LQFP-48_7x7mm_P0.5mm | U1 |
| 4 | GN1640T | SSOP-28_3.9x9.9mm_P0.635mm | U2, U3, U4, U5 |
| 2 | AW9523BTQR | WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6, U7 |
| 2 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U8, U9 |
| 1 | +5VIN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ENC1 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | VOL1 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | BRT | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | AP KB | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | HUD BIT | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ENC2 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | VOL2 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | ADF SW | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | S2_MINI | S2_MINI | MC1 |
| 1 | 5V | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | GND | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | SCL | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | SDA | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP4 |
| 4 | 10UF 10uF | C_0805_2012Metric | C1, C2, C3, C4 |
| 6 | C14663 .1uF | C_0603_1608Metric | C7, C8, C9, C10, C11, C12 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1k | R_0603_1608Metric | R1, R36, R38 |
| 1 | 10K | R_0603_1608Metric | R2 |
| 3 | 2K | R_0603_1608Metric | R3, R37, R39 |
| 4 | 4.7K 4.7k | R_0603_1608Metric | R9, R10, R40, R41 |
UFC Main design files
The KiCad project lives in the Exprezz0/F-18C_Simulator repository on GitHub; these links point at the commit this page was built from.
UFC Main: common questions
How big is the UFC Main PCB?
The UFC Main measures 168 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UFC Main?
44 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UFC Main design files?
From the Exprezz0/F-18C_Simulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UFC Main design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in F-18C_Simulator
DDI
158.2 × 167.4 mm79 parts2LCC-BY-NC-4.014
AMPCD
162.9 × 178.9 mm78 parts2LCC-BY-NC-4.014
CONTROLLER Throttle
47 × 68 mm48 parts2LCC-BY-NC-4.014
Ifei
165.1 × 120.7 mm45 parts2LCC-BY-NC-4.014
GAUGE Dual Needle Instruments
54.6 × 39.2 mm43 parts4LCC-BY-NC-4.014
ABSIS NANO GENERAL I/O
105.2 × 42.4 mm41 parts2LCC-BY-NC-4.014
ABSIS ATX Power Supply Unit
144.4 × 71.1 mm39 parts4LCC-BY-NC-4.014
EYEBROW WARNING INDICATOR LEFT
96.1 × 78.8 mm34 parts2LCC-BY-NC-4.014
ABSIS Backlight Controller
101.6 × 53.3 mm22 parts2LCC-BY-NC-4.014
AVR/ArduinoCONTROLLER Standby Instrument
99.1 × 71.1 mm14 parts2LCC-BY-NC-4.014
ABSIS Mega
99.1 × 53.3 mm10 parts2LCC-BY-NC-4.014