Bme688-breakouty
ezzatisawesome·bme688-breakouty
About the Bme688-breakouty PCB
Bme688-breakouty is an open source PCB design by ezzatisawesome, published on GitHub. It is a 4-layer board measuring 30 × 20 mm, with 15 components from 11 distinct parts.
Other key parts include the BME688 and XC6210B332MR-G. By type, the board carries 4 resistors, 3 connectors, 3 capacitors, 2 ICs, 2 diodes and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Bme688-breakouty
Bme688-breakouty bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME688 | Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U1 |
| 1 | XC6210B332MR-G | SOT-23-5 | U2 |
| 1 | BSS138BKS,115 | SOT-363_SC-70-6_Handsoldering | Q1 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J1 |
| 2 | STEMMA_I2C_QT | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J3 |
| 1 | 1N4148W | D_SOD-123 | D1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 3 | 10kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 1 | 10kΩ | R_Array_Convex_4x0612 | RN1 |
Bme688-breakouty design files
The KiCad project lives in the ezzatisawesome/bme688-breakouty repository on GitHub; these links point at the commit this page was built from.
- Layoutbme688-ezzat-suhaime.kicad_pcb
- Schematicbme688-ezzat-suhaime.kicad_sch
Bme688-breakouty: common questions
How big is the Bme688-breakouty PCB?
The Bme688-breakouty measures 30 × 20 mm, has 4 copper layers and is 1.769872 mm thick.
How many components are on the Bme688-breakouty?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bme688-breakouty design files?
From the ezzatisawesome/bme688-breakouty repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bme688-breakouty design in my own project?
The repository has no license, so all rights stay with ezzatisawesome. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979