Electrone safe
F9Motion·Electrone-safe·KiCad/Electrone safe.kicad_pcb
About the Electrone safe PCB
Electrone safe is an open source RP2040/RP2350 PCB design by F9Motion, published on GitHub. It is a 2-layer board measuring 68 × 64.4 mm, with 30 components from 8 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the ER_OLEDM0.91_1x-I2C. By type, the board carries 13 diodes, 12 switches, 2 modules, 1 IC, 1 battery holder and 1 buzzer.
From the project
Electrone safe for your snacks
Main components on the Electrone safe
Electrone safe bill of materials (BOM)
30 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U1 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Motor_Servo | Vybronics_VZ30C1T8219732L | M1 |
| 1 | Battery_Cell | Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles | BT1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 12 | SW_Push | SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4 |
| 12 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 1 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D13 |
Electrone safe design files
The KiCad project lives in the F9Motion/Electrone-safe repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/Electrone safe.kicad_pcb
- SchematicKiCad/Electrone safe.kicad_sch
Electrone safe: common questions
What microcontroller does the Electrone safe use?
The Electrone safe is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Electrone safe PCB?
The Electrone safe measures 68 × 64.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Electrone safe?
30 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Electrone safe design files?
From the F9Motion/Electrone-safe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Electrone safe design in my own project?
The repository has no license, so all rights stay with F9Motion. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Electrone safe without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k