GameBro

F9Motion·GameBro·KiCad/GameBro/GameBro.kicad_pcb

GameBro PCB layout, top view — open source RP2040/RP2350 board by F9Motion

About the GameBro PCB

GameBro is an open source RP2040/RP2350 PCB design by F9Motion, published on GitHub. It is a 2-layer board measuring 140 × 62 mm, with 18 components from 12 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the Hirose DF40C-100DS-0.4V and MCP73831-2-MC. By type, the board carries 5 switches, 3 connectors, 3 resistors, 2 ICs, 2 capacitors and 1 module.

It belongs with the iot & wireless designs in this gallery.

From the project

My custom console

GameBro, from the project README
From the project README

Main components on the GameBro

GameBro bill of materials (BOM)

18 components, 12 distinct parts.

QtyPartRefs
1
Hirose DF40C-100DS-0.4V
U1
1
MCP73831-2-MC
U2
1
RaspberryPi_Pico
A1
1
HDMI_A
J1
1
POWER_MODULE
J2
1
USB_C_Receptacle_USB2.0_16P
J3
1
Battery_Cell
BT1
1
joystick_analog
JS1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
2
4.7u
C1, C2
2
5.1k
R1, R3
1
2k
R2

GameBro design files

The KiCad project lives in the F9Motion/GameBro repository on GitHub; these links point at the commit this page was built from.

GameBro: common questions

What microcontroller does the GameBro use?

The GameBro is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the GameBro PCB?

The GameBro measures 140 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GameBro?

18 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the GameBro design files?

From the F9Motion/GameBro repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the GameBro design in my own project?

The repository has no license, so all rights stay with F9Motion. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the GameBro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards