Headphone holder

F9Motion·headphone-holder·KiCad/headphone holder.kicad_pcb

Headphone holder PCB layout, top view — open source RP2040/RP2350 board by F9Motion

About the Headphone holder PCB

Headphone holder is an open source RP2040/RP2350 PCB design by F9Motion, published on GitHub. It is a 2-layer board measuring 85.6 × 85.6 mm, with 13 components from 6 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MCP73831-2-MC. By type, the board carries 8 diodes, 1 IC, 1 module, 1 battery holder, 1 switch and 1 resistor.

It belongs with the audio designs in this gallery.

From the project

Custom Headphone holder

Headphone holder, from the project README
From the project README

Main components on the Headphone holder

Headphone holder bill of materials (BOM)

13 components, 6 distinct parts.

QtyPartRefs
1
MCP73831-2-MC
U2
1
RaspberryPi_Pico
A1
1
Battery_Cell
BT1
1
SW_Push
SW1
8
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8
1
R
R1

Headphone holder design files

The KiCad project lives in the F9Motion/headphone-holder repository on GitHub; these links point at the commit this page was built from.

Headphone holder: common questions

What microcontroller does the Headphone holder use?

The Headphone holder is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Headphone holder PCB?

The Headphone holder measures 85.6 × 85.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Headphone holder?

13 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Headphone holder design files?

From the F9Motion/headphone-holder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Headphone holder design in my own project?

The repository has no license, so all rights stay with F9Motion. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Headphone holder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards