KiBot
faatihozkaan·KiBot
About the KiBot PCB
KiBot is an open source ESP32 PCB design by faatihozkaan, published on GitHub under the MIT license. It is a 6-layer board measuring 39.4 × 48 mm, with 5 components from 4 distinct parts.
Its main chip is the ESP32-C3-DEVKITM-1, from the ESP32 family. By type, the board carries 2 capacitors, 1 IC, 1 diode and 1 resistor.
From the project
test2
. ├─ Computations # Misc calculations ├─ HTML # HTML files for generated webpage ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts used in the project │ ├─ scripts # External scripts used with KiBot │ └─ templates # Templates for KiBot generated reports │ ├─ kibotyaml # KiBot YAML config files ├─ KiRI # KiRI (PCB diff viewer) files │ ├─ lib # KiCad footprint and symbol libraries │ ├─ 3dmodels # Component 3D models │ ├─ libfp # Footprint libraries │ └─ lib_sym # Symbol libraries │ ├─ Logos # Logos │ ├─…

Main components on the KiBot
KiBot bill of materials (BOM)
5 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-DEVKITM-1 ESP32-C3-DevKitM-1 | ESP32-C3-DevKitM-1 | U401 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D501 |
| 2 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C401, C501 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R501 |
KiBot design files
The KiCad project lives in the faatihozkaan/KiBot repository on GitHub; these links point at the commit this page was built from.
- LayoutKiBot.kicad_pcb
- SchematicKiBot.kicad_sch
- BOMManufacturing/Assembly/KiBot-bom.csv
KiBot: common questions
What microcontroller does the KiBot use?
The KiBot is built around the ESP32-C3-DEVKITM-1, from the ESP32 family.
How big is the KiBot PCB?
The KiBot measures 39.4 × 48 mm, has 6 copper layers and is 1.66 mm thick.
How many components are on the KiBot?
5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the KiBot design files?
From the faatihozkaan/KiBot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the KiBot design in my own project?
Yes, under the terms of its MIT license, which faatihozkaan chose for the repository.
Can I test firmware for the KiBot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k