Diy led spot
FaisalHussain95·esp32-espnow-led-spots·kicad/diy_led_spot/diy_led_spot.kicad_pcb
About the Diy led spot PCB
Diy led spot is an open source PCB design by FaisalHussain95, published on GitHub. It is a 2-layer board measuring 50.5 × 47.5 mm, with 26 components from 16 distinct parts.
Other key parts include the PT4115, MT3608 and 110kΩ. By type, the board carries 8 capacitors, 6 resistors, 5 diodes, 3 ICs, 2 inductors and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
DIY 220VAC LED spot controller — ESP32-C3 + COB LED + PT4115 PWM dimming, NTC thermal protection, active fan cooling, ESP-NOW mesh. WiFi bridge for Home Assistant (MQTT).
Replacing 13 cheap 220V ceiling spots with custom COB LED units — dimmable, Home Assistant integrated, actively cooled, and wirelessly controlled over ESP-NOW.
I have 13 recessed spots installed across my ceiling. They were cheap 220V AC units with no heatsink — just a bare aluminium PCB glued to a plastic shell.
Opening one up tells the whole story: the driver circuit runs directly off mains voltage with no thermal management whatsoever.

Main components on the Diy led spot
Diy led spot bill of materials (BOM)
26 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PT4115 | SOT-89-5_L4.5-W2.5-P1.50-LS4.5-BR | U2 |
| 1 | MT3608 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | 110kΩ | R0603 | U5 |
| 1 | AO3400A AO3400A_C347475 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | C19269965 0.33 1W | R2512 | Rs1 |
| 5 | SS36 | SMA_L4.3-W2.6-LS5.2-RD | D1, D2, D3, D4, D5 |
| 1 | C167888 47uH 800mA | IND-SMD_L4.0-W4.0_FNR40XXS | L1 |
| 1 | SM3521-4R7MT | IND-SMD_L3.5-W3.0 | L2 |
| 1 | C14858 100pF 50V | C0603 | C1 |
| 2 | C6119901 22uF 35V | C0805 | C2, C4 |
| 1 | C476766 100nF 50V | C0805 | C3 |
| 2 | 100UF 100uF | CAP-SMD_BD5.0-L5.3-W5.3-LS6.3-FD | C5, C8 |
| 2 | 100NF 100nF | C0402 | C7, C9 |
| 4 | C23186 5.1kΩ 100mW | R0603 | R1, R2, R3, R7 |
| 1 | RC0603FR-0747RL | R0603 | R4 |
| 1 | 15kΩ | R0603 | R6 |
Diy led spot design files
The KiCad project lives in the FaisalHussain95/esp32-espnow-led-spots repository on GitHub; these links point at the commit this page was built from.
Diy led spot: common questions
How big is the Diy led spot PCB?
The Diy led spot measures 50.5 × 47.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diy led spot?
26 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diy led spot design files?
From the FaisalHussain95/esp32-espnow-led-spots repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Diy led spot design in my own project?
The repository has no license, so all rights stay with FaisalHussain95. Use it as a reference, and ask the author before reusing the design.
More boards in esp32-espnow-led-spots
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547