Can nano shield
About the Can nano shield
Can nano shield is an open source PCB design by feastorg, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50 × 18 mm, with 18 components from 13 distinct parts.
Other key parts include the MCP2515-XSO and TJA1051T-3. By type, the board carries 5 capacitors, 4 connectors, 2 ICs, 2 resistors, 1 crystal and 1 transformer.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A compact Arduino Nano shield with MCP2515 & TJA1051/3 for easy CAN bus integration. Work-in-progress.
Main components on the Can nano shield
Can nano shield bill of materials (BOM)
18 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-XSO MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | TJA1051T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 16MHz 9pF | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 2 | SSQ-115-03-T-S | SAMTEC_SSQ-115-03-T-S | J1, J2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | CONN_01X03_SOCKET Conn_01x03_Socket | JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J4 |
| 2 | 60 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Rt1, Rt2 |
| 1 | B82789C0113N002 | SMT_13N002_TDK | T1 |
| 1 | PESD2CANFD24LT-Q | TSOT-23 | D1 |
| 2 | 15P 15p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 4.7N 4.7n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 100P 100p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
Can nano shield design files
The KiCad project lives in the feastorg/can-nano-shield repository on GitHub; these links point at the commit this page was built from.
Can nano shield: common questions
How big is the Can nano shield?
The Can nano shield measures 50 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Can nano shield?
18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Can nano shield design files?
From the feastorg/can-nano-shield repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Can nano shield design in my own project?
Yes, under the terms of its GPL-3.0 license, which feastorg chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979