Slice TEMP PICO S2L-r1

feastorg·Slice_TEMP_PICO_S2L-r1·hardware/BREAD_Slice.kicad_pcb

About the Slice TEMP PICO S2L-r1 PCB

Slice TEMP PICO S2L-r1 is an open source RP2040/RP2350 PCB design by feastorg, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70 × 100 mm, with 14 components from 13 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the AP63205. By type, the board carries 6 capacitors, 2 diodes, 1 IC, 1 module, 1 connector and 1 switch.

From the project

Template for repos contains BREAD SLICE modules.

Template for creating BREAD slices. Features Raspberry Pi Pico, small dimensions (70x100mm), 2 layers, and this is the first revision (TEMPPICOS2L-r1).

[Explain how to use the project. Include examples and screenshots if applicable.]

Main components on the Slice TEMP PICO S2L-r1

AP63205 RaspberryPi_Pico

Slice TEMP PICO S2L-r1 bill of materials (BOM)

14 components, 13 distinct parts.

Qty	Part	Footprint	Refs
1	AP63205	SOIC_05WU-7_DIO	U1
1	RaspberryPi_Pico	RaspberryPi_Pico_THT	A2
1	Conn_01x10_Socket	PinSocket_1x10_P2.54mm_Horizontal	J1
1	Heatsink_Pad	Thermal Pad	HS1
1	SW_DIP_x04	SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm	SW1
1	BAT54WS-7-F	D_SOD-323_HandSoldering	D1
1	WS2812B_5050	WS2812-5050-4PIN	D2
1	4.7uH	L_1210_3225Metric	L1
1	10u	C_1206_3216Metric	C1
1	100nF	C_1206_3216Metric	C2
2	22uF	C_1206_3216Metric	C3, C4
1	47u 25V	CP_Elec_6.3x7.7	C5
1	0.1u	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C6

Slice TEMP PICO S2L-r1 design files

The KiCad project lives in the feastorg/Slice_TEMP_PICO_S2L-r1 repository on GitHub; these links point at the commit this page was built from.

Layouthardware/BREAD_Slice.kicad_pcb
Schematichardware/BREAD_Slice.kicad_sch

Slice TEMP PICO S2L-r1: common questions

What microcontroller does the Slice TEMP PICO S2L-r1 use?

The Slice TEMP PICO S2L-r1 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Slice TEMP PICO S2L-r1 PCB?

The Slice TEMP PICO S2L-r1 measures 70 × 100 mm, has 2 copper layers and is 1.67 mm thick.

How many components are on the Slice TEMP PICO S2L-r1?

14 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Slice TEMP PICO S2L-r1 design files?

From the feastorg/Slice_TEMP_PICO_S2L-r1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Slice TEMP PICO S2L-r1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which feastorg chose for the repository.

Can I test firmware for the Slice TEMP PICO S2L-r1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.