Current feedback amplifier
fedeboco·current-feedback-amplifier·schematic/TP-CII.kicad_pcb
About the Current feedback amplifier PCB
Current feedback amplifier is an open source PCB design by fedeboco, published on GitHub. It is a 2-layer board measuring 101.6 × 123.2 mm, with 80 components from 40 distinct parts.
Other key parts include the TL081. By type, the board carries 30 resistors, 23 transistors, 14 capacitors, 5 connectors, 4 diodes and 1 IC.
It belongs with the audio designs in this gallery.
From the project
86.10 - 40W RMS amplifier design with current feedback operational topology and wide bandwidth (around 450 kHz at full power and up to 1 MHz).
The current feedback topology gives this amplifier some independency between gain and bandwidth, resulting in an amplifier with relatively high power and high bandwidth (around 450 kHz at full power). Having a higher bandwidth than the traditional audio band (up to 20 kHz) produces a lower phase distortion in the audio band, consequently producing better sound.

Main components on the Current feedback amplifier
Current feedback amplifier bill of materials (BOM)
80 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL081 | DIP-8_W7.62mm_Socket | U1 |
| 3 | BC857 | TSOT-23_HandSoldering | Q1, Q5, Q6 |
| 3 | BC847 | TSOT-23_HandSoldering | Q2, Q7, Q8 |
| 2 | BC546 | TO-92_Molded_Wide_Oval_Reverse | Q3, Q22 |
| 2 | BC556 | TO-92_Molded_Wide_Oval_Reverse | Q4, Q23 |
| 1 | BC857 | SOT-23_Handsoldering | Q9 |
| 1 | BC556 | TO-92_Molded_Wide_Oval | Q10 |
| 2 | BC546 | TO-92_Molded_Wide_Oval | Q11, Q13 |
| 1 | BC847 | SOT-23_Handsoldering | Q12 |
| 2 | BD135 | TO-126_Vertical | Q14, Q18 |
| 2 | BD136 | TO-126_Vertical | Q15, Q19 |
| 1 | BC817 | TSOT-23_HandSoldering | Q16 |
| 1 | BC807 | TSOT-23_HandSoldering | Q17 |
| 1 | 2SA1941 | TO-3P-3_Vertical | Q20 |
| 1 | 2sc5198 | TO-3P-3_Vertical | Q21 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1, J2, J3, J4, J5 |
| 1 | POT | Potentiometer_Trimmer_Bourns_3296W | RV1 |
| 1 | POT 10k | Potentiometer_Trimmer_Bourns_3296W | RV2 |
| 1 | POT 100k | Potentiometer_Trimmer_Bourns_3296W | RV3 |
| 2 | D1N4470 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1N4007 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 2 | 470n | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1, C6 |
| 1 | 47u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 2 | 1.8p | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3, C19 |
| 4 | 10u | CP_Radial_D6.3mm_P2.50mm | C4, C5, C14, C16 |
| 3 | 100p | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C11, C12, C15 |
| 2 | 47u | CP_Elec_6.3x5.7 | C17, C18 |
| 1 | 10k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 3 | 1.8k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R5, R11 |
| 5 | 10 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4, R7, R8, R27 |
| 4 | 56 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6, R9, R12, R13 |
| 2 | 120 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R10, R17 |
| 2 | 220k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R14, R23 |
| 1 | 560 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R15 |
| 1 | 220 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R16 |
| 3 | 1k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R18, R19, R26 |
| 2 | 680 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R20, R21 |
| 2 | 3.3k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R22, R25 |
| 2 | 100 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R24, R30 |
| 2 | 0.22 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28, R29 |
Current feedback amplifier design files
The KiCad project lives in the fedeboco/current-feedback-amplifier repository on GitHub; these links point at the commit this page was built from.
Current feedback amplifier: common questions
How big is the Current feedback amplifier PCB?
The Current feedback amplifier measures 101.6 × 123.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Current feedback amplifier?
80 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Current feedback amplifier design files?
From the fedeboco/current-feedback-amplifier repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Current feedback amplifier design in my own project?
The repository has no license, so all rights stay with fedeboco. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687