13 open source boards using the TL081

Real designs built with the TL081, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TL081

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TL081 connects to, and the resistors, capacitors and other passives placed on it.

  • The NULL_1 pin is left unconnected on 11 of 12 designs.
  • The NULL_5 pin is left unconnected on 11 of 12 designs.
  • The - pin has a series resistor on 8 of 12 designs, most often 10 kΩ (then 4.7 kΩ).
  • The OUT pin has a series resistor on 8 of 12 designs, most often 10 kΩ (then 4.7 kΩ).
NULL_1pin 1Connected to: Not connected 92%
-pin 2Connected to: Signal 83% · VREF 17%
  • Series resistor on 67% · 10 kΩ (4), 4.7 kΩ (2), 22 kΩ (1)
  • Resistor to GND on 33% · 3.3 kΩ (1), 3.9 kΩ (1), 220 kΩ (1)
+pin 3Connected to: Signal 58% · GND 33%
  • Capacitor to GND on 42% · 470 nF (3), 10 nF (1), 100 nF (1)
  • Series resistor on 33% · 33 kΩ (2), 15 kΩ (1), 12 kΩ (1)
NULL_5pin 5Connected to: Not connected 92%
OUTpin 6Connected to: Signal 92%
  • Series resistor on 67% · 10 kΩ (3), 4.7 kΩ (2), 8.2 kΩ (1)
V+pin 7Connected to: VCC 75% · a signal 25%
  • Decoupling capacitor on 42% · 100 nF (3), 470 nF (2)
NCpin 8Connected to: Not connected 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Freifunk open mppt by elektra42, Ti99-rgb by wiesl, ISEMS-ESP32 by ISEMS and Electronics uldosc by mpinese.

The TL081 in open source designs

The gallery holds 13 open source boards using the TL081 from 13 GitHub repositories; a typical one measures about 99.1 × 70 mm and carries around 61 components.

83% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is Freifunk open mppt by elektra42.

Parts used alongside the TL081

Microcontrollers on boards using the TL081

TL081: common questions

Where can I find a TL081 reference design?

Each of the 13 boards on this page is a real design using the TL081. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TL081 NULL_1 pin connected?

The NULL_1 pin is left unconnected on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the TL081.

How is the TL081 NULL_5 pin connected?

The NULL_5 pin is left unconnected on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the TL081.

What resistor goes on the TL081 - pin?

The - pin has a series resistor on 8 of 12 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 12 open source designs using the TL081.

What parts are used alongside the TL081?

The 4066, LM1881 and MC34063 appear in the most repositories here.

Which microcontrollers do boards using the TL081 use?

Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).

How big is a typical board using the TL081?

The median is 99.1 × 70 mm, and 83% are two-layer designs.

What is the most popular open source board using the TL081?

By GitHub stars, Freifunk open mppt by elektra42, with 89 stars.

Can I simulate one of these boards using the TL081 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part