RPi-CNC-HAT
About the RPi-CNC-HAT
RPi-CNC-HAT is an open source PCB design by fedor2018, published on GitHub. It is a 2-layer board measuring 65 × 56.5 mm, with 84 components from 24 distinct parts.
Other key parts include the LM1117-3.3, EPM570T100 and PC817. By type, the board carries 44 resistors, 10 transistors, 10 capacitors, 7 ICs, 7 connectors and 2 diodes.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
Main components on the RPi-CNC-HAT
RPi-CNC-HAT bill of materials (BOM)
84 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | EPM570T100 | LQFP-100_14x14mm_Pitch0.5mm | U2 |
| 5 | PC817 | DIP-4_W7.62mm | U3, U4, U5, U6, U7 |
| 10 | BC817 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 1 | OSCILLATORSMD-7X5-4PAD | OSCILLATOR-SMD-7X5-4PAD | Y1 |
| 1 | CONN_02 | Molex_KK-6410-02_02x2.54mm_Straight | J1 |
| 1 | RPi_Hat-rescue_RPi_GPIO | hat-PIN_ARRAY_20X2 | J2 |
| 1 | — | JST_EH_B08B-EH-A_08x2.50mm_Straight | J3 |
| 1 | Conn_01x10 | JST_EH_B08B-EH-A_08x2.50mm_Straight | J4 |
| 2 | — | PinHeader_2x05_P2.54mm_Vertical | J6, J9 |
| 1 | Conn_01x10 | JST_EH_B06B-EH-A_06x2.50mm_Straight | J8 |
| 1 | PinHeader_2x04_P2.54mm_Vertical | PinHeader_2x04_P2.54mm_Vertical | REF00 |
| 2 | PinHeader_1x08_P2.54mm_Vertical | PinHeader_1x08_P2.54mm_Vertical | REF01, REF02 |
| 2 | LED-RED0603 | LED_0603_HandSoldering | D1, D2 |
| 1 | 10u | C_0805_HandSoldering | C1 |
| 8 | 0.1 | C_0603_HandSoldering | C2, C4, C5, C6, C7, C8, C9, C10 |
| 1 | 10.0 | C_0805_HandSoldering | C3 |
| 4 | 10k | C_0603_HandSoldering | R1, R2, R3, R4 |
| 5 | 1k | R_0805_HandSoldering | R5, R6, R7, R8, R15 |
| 16 | 1k | C_0603_HandSoldering | R9, R10, R11, R12, R13, R14, R20, R21 +8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0 | R_0603_HandSoldering | R16, R17 |
| 7 | 1k | R_0603_HandSoldering | R18, R19, R33, R34, R35, R36, R37 |
| 8 | 200 | C_0603_HandSoldering | R24, R25, R26, R27, R28, R29, R30, R31 |
| 2 | 0 | C_0603_HandSoldering | R32, R44 |
RPi-CNC-HAT design files
The KiCad project lives in the fedor2018/RPi-CNC-HAT repository on GitHub; these links point at the commit this page was built from.
RPi-CNC-HAT: common questions
How big is the RPi-CNC-HAT?
The RPi-CNC-HAT measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RPi-CNC-HAT?
84 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the RPi-CNC-HAT design files?
From the fedor2018/RPi-CNC-HAT repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RPi-CNC-HAT design in my own project?
The repository has no license, so all rights stay with fedor2018. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k