Linky matter over thread
felixchvl·linky-matter-over-thread·hardware/linky-matter-over-thread.kicad_pcb
About the Linky matter over thread PCB
Linky matter over thread is an open source PCB design by felixchvl, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 64 × 41 mm, with 27 components from 23 distinct parts.
Other key parts include the LTV-814S, MCP1804T-3302I/DB and E73-2G4M08S1C. By type, the board carries 8 capacitors, 5 resistors, 4 diodes, 3 ICs, 2 connectors and 1 transistor.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Linky TIC to Matter over Thread, powered by the meter itself. KiCad 10, nRF52840 (Ebyte E73).
A small board that connects to the TIC output of a French Linky meter and makes its readings available over Thread, as a Matter device. It is powered by the meter itself, so there is no battery to replace and no power supply to run to the meter.
I wanted my electricity usage in Home Assistant, live and without any cloud. The usual options are a Zigbee dongle (ZLinky), a Wi-Fi board that needs a USB supply next to the meter, or the Enedis website a day later. My home already runs a Thread network, and Home Assistant reads Matter energy measurements natively (kWh for the Energy dashboard, plus…

Main components on the Linky matter over thread
Linky matter over thread bill of materials (BOM)
27 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTV-814S Lite-On | SMDIP-4_W9.53mm | U1 |
| 1 | MCP1804T-3302I/DB Microchip | SOT-223-3_TabPin2 | U2 |
| 1 | E73-2G4M08S1C Ebyte | E73-2G4M08S1C | U3 |
| 1 | AO3400A Alpha & Omega | SOT-23 | Q1 |
| 1 | CC7V-T1A 32.768 kHz 9 pF 32.768kHz CL9pF Micro Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | MKDS 1,5/ 3-5,08 TIC Phoenix Contact | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | 6 pins cut from a 1x40 2.54 mm header SWD + UART Econ Connect | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | 2 pins cut from the same header, plus a jumper TIC power Econ Connect | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 64W 2 k multi-turn trimmer (3296W footprint) 2k generic | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | DTS-62N (6 x 6 x 5 mm) BUTTON Diptronics | SW_PUSH_6mm | SW1 |
| 2 | BAT54S-7-F BAT54S Diodes Inc. | SOT-23 | D1, D2 |
| 1 | ZMM20V (MiniMELF, 0.5 W) ZMM20 Hottech | D_MiniMELF | D3 |
| 1 | 17-21/R6C-AP1Q2L/3T red Everlight | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | RD1V477M10016BB100 470u 35V Samwha | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | CL21B105KBFNNNE 1u 50V Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | CL21B106KOQNNNE 10u Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | CL21B104KBCNNNC 100n Samsung | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8 |
| 2 | CC0805JRNPO9BN100 10p C0G Yageo | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 1 | 3.3 k 0805 3k3 Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10 k 0805 10k Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1 M 0805 1M Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 150 k 0805 150k Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2.2 k 0805 2k2 Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Linky matter over thread design files
The KiCad project lives in the felixchvl/linky-matter-over-thread repository on GitHub; these links point at the commit this page was built from.
Linky matter over thread: common questions
How big is the Linky matter over thread PCB?
The Linky matter over thread measures 64 × 41 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Linky matter over thread?
27 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Linky matter over thread design files?
From the felixchvl/linky-matter-over-thread repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Linky matter over thread design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k