THE MULTIBOARD RIGHT
felixwittwer·the_multikeyboard·pcb/RIGHT_Main/multiboard_RIGHT/multiboard_RIGHT.kicad_pcb
About the THE MULTIBOARD RIGHT PCB
THE MULTIBOARD RIGHT is an open source ESP32 PCB design by felixwittwer, published on GitHub. It is a 2-layer board measuring 281 × 155 mm, with 135 components from 5 distinct parts.
Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. By type, the board carries 66 switches, 66 diodes, 2 connectors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
A custom keyboard that does it all. Standard keyboard, steno keyboard and macropad.
A custom keyboard that does it all. Standard keyboard, steno keyboard and macropad. It is a 115% keyboard that is a true alrounder. Besides all the features it excells your typing experience by having a slightly curved shape and some cool wrist rests that attatch magneticaly.
I am actually someone that is currently learning steno myself and I already have a matching keyboard for that. Besides I also have a Macropad and of course a normal keyboard. You counted right I have three keyboards on my desk and this is bothering me. Thats why I decided to build my first own custom keyboard that…

Main components on the THE MULTIBOARD RIGHT
THE MULTIBOARD RIGHT bill of materials (BOM)
135 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | U1 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | PJ-320D-A | HRO_PJ-320D-A | J2 |
| 66 | SW_Push | MX-Hotswap-1U | SW3, SW4, SW5, SW6, SW7, SW8, SW13, SW14 +58 |
| 66 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D11, D12 +58 |
THE MULTIBOARD RIGHT design files
The KiCad project lives in the felixwittwer/the_multikeyboard repository on GitHub; these links point at the commit this page was built from.
THE MULTIBOARD RIGHT: common questions
What microcontroller does the THE MULTIBOARD RIGHT use?
The THE MULTIBOARD RIGHT is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.
How big is the THE MULTIBOARD RIGHT PCB?
The THE MULTIBOARD RIGHT measures 281 × 155 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the THE MULTIBOARD RIGHT?
135 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the THE MULTIBOARD RIGHT design files?
From the felixwittwer/the_multikeyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the THE MULTIBOARD RIGHT design in my own project?
The repository has no license, so all rights stay with felixwittwer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the THE MULTIBOARD RIGHT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in the_multikeyboard
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k