24 open source boards using the ESP32-S3-DEVKITC-1-N8R2
Real designs built with the ESP32-S3-DEVKITC-1-N8R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Science
Sidbit08
126.2 × 143.6 mm89 parts2LNo license1ESP32
Ionos sdr mini
ionos-sdr
168 × 80 mm75 parts2LNo license1ESP32
Eis capstone
stevfu
102 × 45 mm39 parts2LMIT1ESP32
ESP32-S3-VGA-ADAPTOR
cfrankb
100 × 50 mm31 parts2LNo license1ESP32
Split-Keyboard
TomasD-git
336.8 × 150 mm136 parts2LMIT0ESP32
THE MULTIBOARD RIGHT
felixwittwer
281 × 155 mm135 parts2LNo license0ESP32
PenumaticBackpack
srikanth-444
64 × 73 mm94 parts2LNo license0ESP32
MBARETECH
Feraqc
100 × 100 mm48 parts2LNo license0ESP32
GameMan
Studented0
90 × 150 mm40 parts2LNo license0ESP32
ROV-1
IslamHUFE
130 × 90 mm27 parts2LNo license0ESP32
Autonomous seed planting robot
HusseinAlwali
81.6 × 144.1 mm25 parts2LMIT0ESP32
MCU breakout board
RudrakshKavari107
139 × 115 mm23 parts2LNo license0ESP32
SNAB
ras-rap
66.5 × 71.5 mm21 parts2LAGPL-3.00ESP32
C.L.A.S
YoussefAymanJo
334.5 × 135.5 mm13 parts2LNo license0ESP32
AutoSense--Smart-Asset-Monitoring-Maintenance
Muzammillcoste
99.5 × 99.4 mm11 parts2LNo license0ESP32
Wild tamagotchi
ri-buni
61.5 × 69 mm9 parts2LNo license0ESP32
Wild air quality monitor
ri-buni
67.5 × 59.5 mm9 parts2LNo license0- schematic only · 5 partsESP32
ATOM-Actuators
joshomak
5 partsMIT0 ESP32
Science updated
Sidbit08
118.7 × 138.7 mm88 parts2LNo license1ESP32
THE MULTIBOARD LEFT
felixwittwer
236.7 × 146.2 mm110 parts2LNo license0ESP32
MBARETECHmini
Feraqc
85 × 53 mm24 parts2LNo license0ESP32
Quadruped robot
RayaneGuebre
100 × 130 mm5 parts2LNo license0- schematic only · 18 partsESP32
Linefollower
albinCuriel
18 parts2LNo license0 ESP32
PCB pecho
fg-edu-tep
102.9 × 83.2 mm12 parts2LNo license0
How designs wire the ESP32-S3-DEVKITC-1-N8R2
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the ESP32-S3-DEVKITC-1-N8R2 connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pins is tied to 3.3V on 78% of them (not connected on 2, a signal on 6).
- The RST pin is left unconnected on 14 of 19 designs (a signal on 5).
- The GPIO46 pin is left unconnected on 13 of 19 designs (a signal on 6).
- The MTDI/GPIO41 pin is left unconnected on 13 of 19 designs (a signal on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin J1_1, J1_2 | Connected to: 3.3V 78% · a signal 16% | — |
| RSTpin J1_3 | Connected to: Not connected 74% · a signal 26% | — |
| GPIO3pin J1_13 | Connected to: Not connected 63% · a signal 37% | — |
| GPIO46pin J1_14 | Connected to: Not connected 68% · a signal 32% | — |
| GNDpin J1_22, J3_1, J3_21, J3_22 | Connected to: GND 78% · a signal 22% | — |
| U0TXD/GPIO43pin J3_2 | Connected to: Not connected 63% · a signal 37% | — |
| U0RXD/GPIO44pin J3_3 | Connected to: Not connected 63% · a signal 37% | — |
| MTMS/GPIO42pin J3_6 | Connected to: Not connected 63% · a signal 37% | — |
| MTDI/GPIO41pin J3_7 | Connected to: Not connected 68% · a signal 32% | — |
| MTDO/GPIO40pin J3_8 | Connected to: Not connected 63% · a signal 37% | — |
| MTCK/GPIO39pin J3_9 | Connected to: Not connected 63% · a signal 37% | — |
| GPIO45pin J3_15 | Connected to: Not connected 63% · a signal 37% | — |
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-S3-VGA-ADAPTOR by cfrankb, Ionos sdr mini by ionos-sdr, Science updated by Sidbit08 and Eis capstone by stevfu.
The ESP32-S3-DEVKITC-1-N8R2 in open source designs
The gallery holds 24 open source boards using the ESP32-S3-DEVKITC-1-N8R2 from 21 GitHub repositories; a typical one measures about 101 × 99.7 mm and carries around 26 components.
100% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is Sciencepcb by Sidbit08.
Parts used alongside the ESP32-S3-DEVKITC-1-N8R2
Microcontrollers on boards using the ESP32-S3-DEVKITC-1-N8R2
What boards using the ESP32-S3-DEVKITC-1-N8R2 are built for
ESP32-S3-DEVKITC-1-N8R2: common questions
Where can I find a ESP32-S3-DEVKITC-1-N8R2 reference design?
Each of the 24 boards on this page is a real design using the ESP32-S3-DEVKITC-1-N8R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-DEVKITC-1-N8R2 3V3 pin connected?
The 3V3 pins is tied to 3.3V on 78% of them (not connected on 2, a signal on 6). Counted from the KiCad layouts of 19 open source designs using the ESP32-S3-DEVKITC-1-N8R2.
How is the ESP32-S3-DEVKITC-1-N8R2 RST pin connected?
The RST pin is left unconnected on 14 of 19 designs (a signal on 5). Counted from the KiCad layouts of 19 open source designs using the ESP32-S3-DEVKITC-1-N8R2.
How is the ESP32-S3-DEVKITC-1-N8R2 GPIO46 pin connected?
The GPIO46 pin is left unconnected on 13 of 19 designs (a signal on 6). Counted from the KiCad layouts of 19 open source designs using the ESP32-S3-DEVKITC-1-N8R2.
Which microcontrollers do boards using the ESP32-S3-DEVKITC-1-N8R2 use?
Most are built on ESP32 (24).
How big is a typical board using the ESP32-S3-DEVKITC-1-N8R2?
The median is 101 × 99.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DEVKITC-1-N8R2?
By GitHub stars, Sciencepcb by Sidbit08, with 1 stars.
Can I simulate one of these boards using the ESP32-S3-DEVKITC-1-N8R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.