MBARETECHmini

Feraqc·Mbaretech-PCB·MBARETECHmini_PCB/MBARETECHmini_PCB/MBARETECHmini.kicad_pcb

MBARETECHmini PCB layout, top view — open source ESP32 board by Feraqc

About the MBARETECHmini PCB

MBARETECHmini is an open source ESP32 PCB design by Feraqc, published on GitHub. It is a 2-layer board measuring 85 × 53 mm, with 24 components from 19 distinct parts.

Its main chip is the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family. By type, the board carries 7 resistors, 2 speakers, 2 switches and 1 IC.

Main components on the MBARETECHmini

MBARETECHmini bill of materials (BOM)

24 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DEVKITC-1-N8R2
U1
1
BUCK_3V3
BUCK1
1
BATT
Battery1
1
DIP
DIP1
1
IMU
IMU1
1
IR1
IR1
1
IR2
IR2
1
IR3
IR3
1
KS
KS1
1
LS1
LS1
1
LS2
LS2
1
MA
MA1
1
MB
MB1
1
MA PWR
MotorA1
1
MB PWR
MotorB1
1
SW1
SW1
1
SW2
SW2
5
10K
10k
R1, R2, R3, R4, R5
2
1OK
1Ok
R6, R7

MBARETECHmini design files

The KiCad project lives in the Feraqc/Mbaretech-PCB repository on GitHub; these links point at the commit this page was built from.

MBARETECHmini: common questions

What microcontroller does the MBARETECHmini use?

The MBARETECHmini is built around the ESP32-S3-DEVKITC-1-N8R2, from the ESP32 family.

How big is the MBARETECHmini PCB?

The MBARETECHmini measures 85 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MBARETECHmini?

24 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MBARETECHmini design files?

From the Feraqc/Mbaretech-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MBARETECHmini design in my own project?

The repository has no license, so all rights stay with Feraqc. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MBARETECHmini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Mbaretech-PCB

Similar boards