Air mouse esp32-icm20948
Ferb27·air-mouse-esp32-icm20948·hardware/air_mouse.kicad_sch
About the Air mouse esp32-icm20948 PCB
Air mouse esp32-icm20948 is an open source ESP32 PCB design by Ferb27, published on GitHub under the MIT license. It is a board, with 31 components from 28 distinct parts.
Its main chip is the ESP32_DevKit_V1_38Pin, from the ESP32 family. Other key parts include the WCMCU-20948, BSS138_LevelShifter, AMS1117-1.8V, TP4056_TypeC and MT3608_Boost_5V. By type, the board carries 11 test points, 4 ICs, 4 switches, 4 capacitors, 3 resistors and 2 modules.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
BLE HID air mouse: ESP32 + ICM-20948, PlatformIO firmware, host-tested motion pipeline, KiCad, reports (embedded systems course project)
Đồ án môn Hệ thống nhúng (HCMUTE). Một chiếc chuột cầm trên tay: xoay cổ tay để di chuyển con trỏ, 3 nút bấm để click trái/phải và bật/tắt chế độ, kết nối máy tính qua Bluetooth Low Energy (HID). Điểm cuối kỳ: A+.
Sơ đồ nguyên lý và bảng nối dây: deliverables/BANGNOIDAYAIRMOUSEDIRECT3V3.md, hardware/ (KiCad), docs/AIRMOUSEHARDWAREARCHITECTURE.md`.
Ảnh lắp ráp thực tế trên breadboard: 1, 2, 3.
Main components on the Air mouse esp32-icm20948
Air mouse esp32-icm20948 bill of materials (BOM)
31 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_DevKit_V1_38Pin | PinSocket_2x19_P2.54mm_Vertical | U1 |
| 1 | WCMCU-20948 | PinSocket_1x10_P2.54mm_Vertical | U2 |
| 1 | BSS138_LevelShifter | BSS138_LevelShifter_Module | U3 |
| 1 | AMS1117-1.8V | SOT-223-3_TabPin2 | U4 |
| 1 | TP4056_TypeC | TP4056_TypeC_Module | MOD1 |
| 1 | MT3608_Boost_5V | MT3608_Boost_Module | MOD2 |
| 1 | LiPo_1S_JST_PH | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | I2C_Expansion_3V3 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SS12D00_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | Tactile_Left | SW_PUSH_6mm | SW2 |
| 1 | Tactile_Right | SW_PUSH_6mm | SW3 |
| 1 | Tactile_Mode | SW_PUSH_6mm | SW4 |
| 1 | TP_IMU_SCL_3V3 | TestPoint_Pad_D2.0mm | TP1 |
| 1 | TP_IMU_SDA_3V3 | TestPoint_Pad_D2.0mm | TP2 |
| 1 | TP_IMU_SCL_1V8 | TestPoint_Pad_D2.0mm | TP3 |
| 1 | TP_IMU_SDA_1V8 | TestPoint_Pad_D2.0mm | TP4 |
| 1 | TP_IMU_INT_1V8 | TestPoint_Pad_D2.0mm | TP5 |
| 1 | TP_1V8 | TestPoint_Pad_D2.0mm | TP6 |
| 1 | TP_GND | TestPoint_Pad_D2.0mm | TP7 |
| 1 | TP_VBAT | TestPoint_Pad_D2.0mm | TP8 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP_VSYS | TestPoint_Pad_D2.0mm | TP9 |
| 1 | TP_5V | TestPoint_Pad_D2.0mm | TP10 |
| 1 | TP_3V3 | TestPoint_Pad_D2.0mm | TP11 |
| 1 | LED_Green_3mm | LED_D3.0mm | D1 |
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C4 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.00mm | C2, C3 |
| 1 | 1k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 100k_1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
Air mouse esp32-icm20948 design files
The KiCad project lives in the Ferb27/air-mouse-esp32-icm20948 repository on GitHub; these links point at the commit this page was built from.
Air mouse esp32-icm20948: common questions
What microcontroller does the Air mouse esp32-icm20948 use?
The Air mouse esp32-icm20948 is built around the ESP32_DevKit_V1_38Pin, from the ESP32 family.
How many components are on the Air mouse esp32-icm20948?
31 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Air mouse esp32-icm20948 design files?
From the Ferb27/air-mouse-esp32-icm20948 repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the Air mouse esp32-icm20948 design in my own project?
Yes, under the terms of its MIT license, which Ferb27 chose for the repository.
Can I test firmware for the Air mouse esp32-icm20948 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k