2 open source boards using the AMS1117-1.8V

Real designs built with the AMS1117-1.8V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The AMS1117-1.8V in open source designs

The gallery holds 2 open source boards using the AMS1117-1.8V from 2 GitHub repositories; a typical one measures about 170.1 × 79 mm and carries around 122 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Int brain stm32 by eccentricOrange.

Microcontrollers on boards using the AMS1117-1.8V

What boards using the AMS1117-1.8V are built for

AMS1117-1.8V: common questions

Where can I find a AMS1117-1.8V reference design?

Each of the 2 boards on this page is a real design using the AMS1117-1.8V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AMS1117-1.8V use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the AMS1117-1.8V?

The median is 170.1 × 79 mm, and 0% are two-layer designs.

What is the most popular open source board using the AMS1117-1.8V?

By GitHub stars, Int brain stm32 by eccentricOrange, with 0 stars.

Can I simulate one of these boards using the AMS1117-1.8V before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part