HardLabs

Panel receiver

firstdorsal·led-panels·pcb/panel_receiver/panel_receiver/panel_receiver.kicad_pcb

Panel receiver PCB layout, top view — open source RP2040/RP2350 board by firstdorsal

About the Panel receiver PCB

Panel receiver is an open source RP2040/RP2350 PCB design by firstdorsal, published on GitHub. It is a 2-layer board measuring 60 × 67.5 mm, with 15 components from 12 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the 74AHCT125. By type, the board carries 5 connectors, 5 resistors, 3 ICs and 2 capacitors.

From the project

Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

Lange Seite: abstand zwischen pin reihen 4,1cm Kurze Seite 4rer pinleiste

Lange Seite: abstand löcher 5,5cm Kurze Seite abstand löcher 2,5cm FALSCH IN KICAD

- abstand des dc dc wandlers - jede menge silk screen fehlt mit labels usw

- DC DC wandler auf die richtige output spannung tunen vor dem einschalten

- steckerlöcher direkt auf der einen seite des pcb alle anderen komponenten auf der rückseite

Main components on the Panel receiver

Pico74AHCT125

Panel receiver bill of materials (BOM)

15 components, 12 distinct parts.

QtyPartRefs
1
~
U1
1
Pico
U2
1
74AHCT125
U3
1
Conn_01x04_Pin
J1
1
Conn_01x04_Pin
J2
2
Conn_01x03_Pin
J3, J5
1
Conn_01x08_Pin
J4
1
100nF
C1
1
1000uF
C2
2
4.7k
R1, R2
2
330
R3, R4
1
120
R5

Panel receiver design files

The KiCad project lives in the firstdorsal/led-panels repository on GitHub; these links point at the commit this page was built from.

Panel receiver: common questions

What microcontroller does the Panel receiver use?

The Panel receiver is built around the Pico, from the RP2040/RP2350 family.

How big is the Panel receiver PCB?

The Panel receiver measures 60 × 67.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel receiver?

15 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel receiver design files?

From the firstdorsal/led-panels repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Panel receiver design in my own project?

The repository has no license, so all rights stay with firstdorsal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Panel receiver without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in led-panels

Similar boards