HardLabs

FishcoKeyboard

FishcoScorp·FishcoKeyboard·Build_Files/75% Keyboard.kicad_pcb

FishcoKeyboard PCB layout, top view — open source ESP32 board by FishcoScorp
Simulate this board

About the FishcoKeyboard PCB

FishcoKeyboard is an open source ESP32 PCB design by FishcoScorp, published on GitHub. It is a 2-layer board measuring 410.2 × 126.5 mm, with 188 components from 10 distinct parts.

Its main chip is the ESP32-S3-DevKitC-1, from the ESP32 family. By type, the board carries 93 switches, 93 diodes, 1 IC and 1 LED.

It belongs with the keyboards designs in this gallery.

From the project

My keyboard for the program fallout by hackclub

FishcoKeyboard, from the project README
From the project README

Main components on the FishcoKeyboard

ESP32-S3-DevKitC-1

FishcoKeyboard bill of materials (BOM)

188 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-DevKitC-1
U1
82
MX_SW_HS
SW1, SW2, SW3, SW4, SW5, SW6, SW10, SW11 +74
2
MX_SW_HS
SW7, SW81
2
MX_SW_HS
SW8, SW71
2
MX_SW_HS
SW9, SW76
3
MX_SW_HS
SW25, SW31, SW37
1
MX_SW_HS
SW43
1
MX_SW_HS
SW80
1
OLED_0.91in_SSD1306_I2C
DISP1
93
D
D1, D2, D3, D4, D5, D6, D7, D8 +85

FishcoKeyboard design files

The KiCad project lives in the FishcoScorp/FishcoKeyboard repository on GitHub; these links point at the commit this page was built from.

FishcoKeyboard: common questions

What microcontroller does the FishcoKeyboard use?

The FishcoKeyboard is built around the ESP32-S3-DevKitC-1, from the ESP32 family.

How big is the FishcoKeyboard PCB?

The FishcoKeyboard measures 410.2 × 126.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FishcoKeyboard?

188 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FishcoKeyboard design files?

From the FishcoScorp/FishcoKeyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FishcoKeyboard design in my own project?

The repository has no license, so all rights stay with FishcoScorp. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FishcoKeyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards