13 open source boards using the ESP32-S3-DevKitC-1
Real designs built with the ESP32-S3-DevKitC-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 21 partsESP32
AwesomeStudioPedal
tgd1975
21 partsMIT3 ESP32
Keypad
gavhu10
67 × 111.8 mm10 parts2LNo license2ESP32
Cubli
ivannasocarras
131.9 × 114.3 mm36 parts2LNo license1- schematic only · 18 partsESP32
Meshtastic e22-node
andriykohut
18 partsMIT1 ESP32
Portfolio
megmem044
191.8 × 123 mm252 parts4LNo license0ESP32
FishcoKeyboard
FishcoScorp
410.2 × 126.5 mm188 parts2LNo license0ESP32
MagPanel Carrier
Kem4lk
100 × 63.5 mm47 parts2LNo license0ESP32
Terrascout grounded
partofcosmos-site
100 × 80 mm29 parts2LCERN-OHL-S-2.00ESP32
Sh03
penmoid
100 × 56 mm14 parts2LCERN-OHL-P-2.00- schematic only · 30 partsESP32
Buddy
nadellasripad11
30 partsNo license0 - schematic only · 20 partsESP32
Trace memory pebble hackathon
hupop444
20 partsNo license0 ESP32
MagPanel Carrier DIY
Kem4lk
100 × 63.5 mm47 parts2LNo license0ESP32
MagPanel Carrier tek yuz
Kem4lk
150 × 100 mm47 parts2LNo license0
How designs wire the ESP32-S3-DevKitC-1
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ESP32-S3-DevKitC-1 connects to, and the resistors, capacitors and other passives placed on it.
- The GPIO46_14 pin is left unconnected on 6 of 6 designs.
- The GPIO40/MTDO_37 pin is left unconnected on 6 of 6 designs.
- The RST_3 pin is left unconnected on 5 of 6 designs.
- The GPIO39/MTCK_36 pin is left unconnected on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3_1pin 1 | Connected to: 3.3V 67% · not connected 17% · a signal 17% | — |
| RST_3pin 3 | Connected to: Not connected 83% · a signal 17% | — |
| GPIO46_14pin 14 | Connected to: Not connected 100% | — |
| GPIO11/ADC2_CH0_17pin 17 | Connected to: Signal 83% · not connected 17% |
|
| GND_22pin 22 | Connected to: GND 100% | — |
| GND_23pin 23 | Connected to: GND 100% | — |
| GPIO19/USB_D-_25pin 25 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO20/USB_D+_26pin 26 | Connected to: A connector 33% · not connected 17% · VBAT_SENSE 17% |
|
| GPIO36_33pin 33 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO37_34pin 34 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO38_35pin 35 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO39/MTCK_36pin 36 | Connected to: Not connected 83% · a signal 17% | — |
| GPIO40/MTDO_37pin 37 | Connected to: Not connected 100% | — |
| GPIO42/MTMS_39pin 39 | Connected to: A connector 33% · not connected 33% |
|
| GPIO1/ADC1_CH0_41pin 41 | Connected to: Not connected 67% · a signal 33% | — |
| GPIO44/U0RXD_42pin 42 | Connected to: Not connected 67% · a signal 33% | — |
| GND_43pin 43 | Connected to: GND 83% · not connected 17% | — |
| GND_44pin 44 | Connected to: GND 83% · 5V 17% | — |
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Keypad by gavhu10, Cubli by ivannasocarras, FishcoKeyboard by FishcoScorp and MagPanel Carrier by Kem4lk.
The ESP32-S3-DevKitC-1 in open source designs
The gallery holds 13 open source boards using the ESP32-S3-DevKitC-1 from 11 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 30 components.
89% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.
The most starred is AwesomeStudioPedal by tgd1975.
Microcontrollers on boards using the ESP32-S3-DevKitC-1
What boards using the ESP32-S3-DevKitC-1 are built for
ESP32-S3-DevKitC-1: common questions
Where can I find a ESP32-S3-DevKitC-1 reference design?
Each of the 13 boards on this page is a real design using the ESP32-S3-DevKitC-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-S3-DevKitC-1 GPIO46_14 pin connected?
The GPIO46_14 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ESP32-S3-DevKitC-1.
How is the ESP32-S3-DevKitC-1 GPIO40/MTDO_37 pin connected?
The GPIO40/MTDO_37 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ESP32-S3-DevKitC-1.
How is the ESP32-S3-DevKitC-1 RST_3 pin connected?
The RST_3 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ESP32-S3-DevKitC-1.
Which microcontrollers do boards using the ESP32-S3-DevKitC-1 use?
Most are built on ESP32 (13).
How big is a typical board using the ESP32-S3-DevKitC-1?
The median is 100 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DevKitC-1?
By GitHub stars, AwesomeStudioPedal by tgd1975, with 3 stars.
Can I simulate one of these boards using the ESP32-S3-DevKitC-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.