Sist Mic Mul Int
fjvizcaino·DIS_PLACAS_CIR_IMPRESO·Sist_Mic_Mul_Int/Sist_Mic_Mul_Int.kicad_pcb
About the Sist Mic Mul Int PCB
Sist Mic Mul Int is an open source TI MSP430/CC PCB design by fjvizcaino, published on GitHub. It is a 2-layer board measuring 100.5 × 131.5 mm, with 100 components from 33 distinct parts.
Its main chip is the MSP430F5335IPZ, from the TI MSP430/CC family. Other key parts include the MAX3072E, ULN2803A, MAX3232, TLP181 and LP2985-3.3. By type, the board carries 27 resistors, 24 capacitors, 19 connectors, 11 ICs, 7 diodes and 4 jumpers.
From the project
En este repositorio se incluyen el tutorial usando KiCad 6.0.2 y el diseño autónomo asociados a las prácticas de la asignatura DISEÑO DE PLACAS DE CIRCUITO IMPRESO del MÁSTER EN SISTEMAS ELECTRÓNICOS PARA ENTORNOS INTELIGENTES
Main components on the Sist Mic Mul Int
Sist Mic Mul Int bill of materials (BOM)
100 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3072E | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ULN2803A | SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
| 1 | MAX3232 | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 6 | TLP181 | MFSOP6-4_4.4x3.6mm_P1.27mm | U4, U5, U7, U8, U10, U11 |
| 1 | MSP430F5335IPZ | TQFP-80_12x12mm_P0.5mm | U6 |
| 1 | LP2985-3.3 | TSOP-5_1.65x3.05mm_P0.95mm | U9 |
| 1 | Crystal_Small | XTAL_32.768 kHz | Y1 |
| 1 | HEADER7X2_103309_2 | IDC-Header_2x07_P2.54mm_Vertical | J1 |
| 13 | Screw_Terminal_01x02 | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J2, J3, J6, J7, J9, J10, J11, J13 +5 |
| 3 | Screw_Terminal_01x03 | PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J4, J5, J20 |
| 1 | Screw_Terminal_01x04 | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J8 |
| 1 | Con_Jack_DC-10 | CLIFF_DC-10A | J17 |
| 1 | Porta_Pilas | Battery_Holder_Keystone_2468 | BT1 |
| 2 | Jumper_3_Open | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2 |
| 2 | Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | JP3, JP4 |
| 4 | RELE_PA1a-12V | Relay_SPST_Panasonic_PA-1a-12V_5x20mm_H12.8mm | K1, K2, K3, K4 |
| 2 | SW_Push_NO_BOURNS_7914J | SW_Push_1P1T_NO_4.5x4.5mm_H4.19mm_Bourns_7914 | SW1, SW2 |
| 6 | LED_SML-310 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D6, D7 |
| 1 | ZHCS1000 | D_SOT-23_ANK | D5 |
| 8 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C20, C22, C23, C24 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C8, C9, C10, C11, C12 +4 |
| 2 | 10u | CP_Elec_5x5.3 | C15, C18 |
| 1 | 2u2 | CP_Tantalum_Case-A_EIA-3216-18_Hand | C19 |
| 1 | 47u | CP_Elec_6.3x5.8 | C21 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R14, R25 |
| 5 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R8, R12, R27 |
| 4 | 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R9 |
| 1 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 4 | 5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R17, R21, R23 |
| 4 | 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R18, R22, R24 |
| 2 | 560 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R20 |
| 1 | 75 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
Sist Mic Mul Int design files
The KiCad project lives in the fjvizcaino/DIS_PLACAS_CIR_IMPRESO repository on GitHub; these links point at the commit this page was built from.
Sist Mic Mul Int: common questions
What microcontroller does the Sist Mic Mul Int use?
The Sist Mic Mul Int is built around the MSP430F5335IPZ, from the TI MSP430/CC family.
How big is the Sist Mic Mul Int PCB?
The Sist Mic Mul Int measures 100.5 × 131.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sist Mic Mul Int?
100 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sist Mic Mul Int design files?
From the fjvizcaino/DIS_PLACAS_CIR_IMPRESO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sist Mic Mul Int design in my own project?
The repository has no license, so all rights stay with fjvizcaino. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sist Mic Mul Int without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in DIS_PLACAS_CIR_IMPRESO
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021