5 open source boards using the MAX3072E

Real designs built with the MAX3072E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the MAX3072E

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX3072E connects to, and the resistors, capacitors and other passives placed on it.

  • The B pin has a series resistor on 4 of 5 designs, most often 120 Ω (then 10 Ω).
  • The A pin has a pull-up to 5V on 3 of 5 designs, most often 4.7 kΩ (then 100 kΩ).
  • The B pin has a resistor to GND on 3 of 5 designs, most often 4.7 kΩ (then 100 kΩ).
  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF).
DEpin 3Connected to: The microcontroller 60%
  • Resistor to GND on 40% · 47 kΩ (1), 4.7 kΩ (1)
GNDpin 5Connected to: GND 100%
Apin 6Connected to: A connector 60%
  • Pull-up to 5V on 60% · 4.7 kΩ (2), 100 kΩ (1)
  • Series resistor on 40% · 10 Ω (1), 120 Ω (1)
Bpin 7Connected to: A connector 60%
  • Series resistor on 80% · 120 Ω (3), 10 Ω (1)
  • Resistor to GND on 60% · 4.7 kΩ (2), 100 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (3), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include All in One Railroad Interface by GBert, Womo by muccc, Piaa by soypat and Sist Mic Mul Int by fjvizcaino.

The MAX3072E in open source designs

The gallery holds 5 open source boards using the MAX3072E from 5 GitHub repositories; a typical one measures about 98.6 × 75.3 mm and carries around 127 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is All in One Railroad Interface by GBert.

Microcontrollers on boards using the MAX3072E

What boards using the MAX3072E are built for

MAX3072E: common questions

Where can I find a MAX3072E reference design?

Each of the 5 boards on this page is a real design using the MAX3072E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MAX3072E B pin?

The B pin has a series resistor on 4 of 5 designs, most often 120 Ω (then 10 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX3072E.

What pull-up resistor is used on the MAX3072E A pin?

The A pin has a pull-up to 5V on 3 of 5 designs, most often 4.7 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the MAX3072E.

What decoupling capacitors do designs use on the MAX3072E VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the MAX3072E.

Which microcontrollers do boards using the MAX3072E use?

Most are built on ESP32 (1), PIC (1), RP2040/RP2350 (1) and TI MSP430/CC (1).

How big is a typical board using the MAX3072E?

The median is 98.6 × 75.3 mm, and 80% are two-layer designs.

What is the most popular open source board using the MAX3072E?

By GitHub stars, All in One Railroad Interface by GBert, with 99 stars.

Can I simulate one of these boards using the MAX3072E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part