AI Wallet Grade3
Flamecthulhu·AI_Wallet_Grade3·Design/circuit design/circuit design.kicad_pcb
About the AI Wallet Grade3 PCB
AI Wallet Grade3 is an open source STM32 PCB design by Flamecthulhu, published on GitHub. It is a 2-layer board measuring 59.7 × 97.2 mm, with 10 components from 10 distinct parts.
Its main chip is the STM32H7xx Dev Board, from the STM32 family. Other key parts include the ESP-01S, HM-10, uBlox_NEO_7M, E-Paper_296x152_SSD1680 and MP1584EN. By type, the board carries 8 ICs, 1 relay and 1 inductor.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
A smart wallet project for high school 3th grade
By collecting location data, it can automatically display the appropriate QR code for entry or exit, eliminating the need for physical tickets and reducing the risk of losing or damaging them.

Main components on the AI Wallet Grade3
AI Wallet Grade3 bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H7xx Dev Board | MODULE_STM327H7xx Dev Module_1 | U1 |
| 1 | ESP-01S | MODULE_ESP-01 | U2 |
| 1 | HM-10 | PinHeader_1x06_P2.54mm_Vertical | U3 |
| 1 | uBlox_NEO_7M | PinHeader_1x05_P2.54mm_Vertical | U4 |
| 1 | E-Paper_296x152_SSD1680 | PinHeader_1x08_P2.54mm_Vertical | U5 |
| 1 | MP1584EN | MP1584EN Module | U6 |
| 1 | EasyCard_IC | PinHeader_1x03_P2.54mm_Vertical | U7 |
| 1 | TP4056 | TP4056 | U8 |
| 1 | R2_1A05 | DIP-14_W7.62mm_Socket | K1 |
| 1 | Coil | PinHeader_1x02_P2.54mm_Vertical | L1 |
AI Wallet Grade3 design files
The KiCad project lives in the Flamecthulhu/AI_Wallet_Grade3 repository on GitHub; these links point at the commit this page was built from.
AI Wallet Grade3: common questions
What microcontroller does the AI Wallet Grade3 use?
The AI Wallet Grade3 is built around the STM32H7xx Dev Board, from the STM32 family.
How big is the AI Wallet Grade3 PCB?
The AI Wallet Grade3 measures 59.7 × 97.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AI Wallet Grade3?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the AI Wallet Grade3 design files?
From the Flamecthulhu/AI_Wallet_Grade3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AI Wallet Grade3 design in my own project?
The repository has no license, so all rights stay with Flamecthulhu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AI Wallet Grade3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k