HardLabs

NR1B-Analog

Flanagan-Lab-Neutron-Detector·NR1B-Analog·v1.0/NR1B-analog.kicad_pcb

NR1B-Analog PCB layout, top view — open source RP2040/RP2350 board by Flanagan-Lab-Neutron-Detector

About the NR1B-Analog PCB

NR1B-Analog is an open source RP2040/RP2350 PCB design by Flanagan-Lab-Neutron-Detector, published on GitHub. It is a 4-layer board measuring 71.2 × 134.5 mm, with 90 components from 31 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the DAC11001BPFBR, ADR444ARZ, OPA189IDGKT, OPA4182 and OPA189ID. By type, the board carries 29 capacitors, 25 resistors, 14 ICs, 4 connectors, 4 test points and 3 inductors.

From the project

NISoC Readout 1 Analog Board

Main components on the NR1B-Analog

DAC11001BPFBRADR444ARZOPA189IDGKTOPA4182PicoOPA189IDLT3093EMSE-PBF20K10KLT3042MPMSE-PBFLDK320ADU120R

NR1B-Analog bill of materials (BOM)

90 components, 31 distinct parts.

QtyPartRefs
2
DAC11001BPFBR
U1, U14
1
ADR444ARZ
U2
1
OPA189IDGKT
U3
1
OPA4182
U4
1
Pico
U5
2
OPA189ID
U6, U13
1
LT3093EMSE-PBF
U7
2
20K
U8, U12
1
10K
U9
1
LT3042MPMSE-PBF
U10
1
LDK320ADU120R
U11
2
Conn_02x04_Odd_Even
J1, J2
1
SWD
J3
1
UART
J8
10
TestPoint
CS_DAC0, CS_DAC1, CS_SYS1, GND1, MISO_DAC1, MISO_SYS1, MOSI_DAC1, MOSI_SYS1 +2
1
1-1571636-0
SW1
4
TestPoint
TP1, TP2, TP3, TP4
3
FerriteBead
FB1, FB2, FB3
20
0.1uF
C1, C3, C4, C6, C8, C9, C11, C14 +12
3
10uF
C2, C7, C12
Show 11 more
QtyPartRefs
2
100uF
C5, C13
1
1uF
C10
1
47uF
C21
2
2.2uF
C22, C23
2
130K
R1, R2
3
1K
R3, R7, R8
3
100K
R4, R11, R12
11
10K
R5, R6, R14, R15, R17, R20, R21, R22 +3
2
1M
R9, R16
2
47K
R10, R13
2
47
R18, R19

NR1B-Analog design files

The KiCad project lives in the Flanagan-Lab-Neutron-Detector/NR1B-Analog repository on GitHub; these links point at the commit this page was built from.

NR1B-Analog: common questions

What microcontroller does the NR1B-Analog use?

The NR1B-Analog is built around the Pico, from the RP2040/RP2350 family.

How big is the NR1B-Analog PCB?

The NR1B-Analog measures 71.2 × 134.5 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the NR1B-Analog?

90 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the NR1B-Analog design files?

From the Flanagan-Lab-Neutron-Detector/NR1B-Analog repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NR1B-Analog design in my own project?

The repository has no license, so all rights stay with Flanagan-Lab-Neutron-Detector. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NR1B-Analog without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards