4 open source boards using the POLOLU_3V3
Real designs built with the POLOLU_3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Safecast air teensy
Safecast
108 × 69.9 mm58 parts2LNo license7Led backlight controller
willdickson
57.2 × 38.1 mm24 parts2LCustom license1Arena 12-18 s v0
floesche
330.2 × 238.5 mm88 parts2LCC-BY-4.00Arena 6-inf v0p3
floesche
260 × 60 mm34 parts2LCC-BY-4.00
The POLOLU_3V3 in open source designs
The gallery holds 4 open source boards using the POLOLU_3V3 from 3 GitHub repositories; a typical one measures about 184 × 64.9 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Safecast air teensy by Safecast.
Microcontrollers on boards using the POLOLU_3V3
What boards using the POLOLU_3V3 are built for
POLOLU_3V3: common questions
Where can I find a POLOLU_3V3 reference design?
Each of the 4 boards on this page is a real design using the POLOLU_3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the POLOLU_3V3 use?
Most are built on NXP (1).
How big is a typical board using the POLOLU_3V3?
The median is 184 × 64.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the POLOLU_3V3?
By GitHub stars, Safecast air teensy by Safecast, with 7 stars.
Can I simulate one of these boards using the POLOLU_3V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.