HardLabs

Driver 40mm atmega v0p4

floesche·LED-Display_G4_Hardware_Driver·driver_40mm_atmega_v0p4/driver_40mm_atmega_v0p4.kicad_pcb

Driver 40mm atmega v0p4 PCB layout, top view — open source AVR/Arduino board by floesche

About the Driver 40mm atmega v0p4 PCB

Driver 40mm atmega v0p4 is an open source AVR/Arduino PCB design by floesche, published on GitHub under the CC-BY-4.0 license. It is a 4-layer board measuring 40 × 40 mm, with 88 components from 8 distinct parts.

Its main chip is the ATMEGA328P-MUR, from the AVR/Arduino family. Other key parts include the DMC2400UV-7DI. By type, the board carries 36 ICs, 36 resistors, 4 crystals, 4 connectors, 4 LEDs and 4 capacitors.

It belongs with the displays & leds designs in this gallery, and the repository also holds 4 earlier revisions of it.

Main components on the Driver 40mm atmega v0p4

ATMEGA328P-MURDMC2400UV-7DI

Driver 40mm atmega v0p4 bill of materials (BOM)

88 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
ATMEGA328P-MUR
ATMEGA328P-M
Digikey
IC1, IC2, IC3, IC4
32
DMC2400UV-7DI
DMC2400UV
Digikey
U1, U2, U3, U4, U5, U6, U7, U8 +24
4
490-1199-6
CER_RESO
Digikey
X1, X2, X3, X4
4
952-2119
CONN_2X2
Digikey
P1, P2, P3, P4
4
LED_8X8
MATRIX1, MATRIX2, MATRIX3, MATRIX4
4
1276-1258-1
0.1uF
Digikey
C1, C2, C3, C4
4
311-4.7KGR
4.7k
Digikey
R1, R2, R3, R4
32
RG16P160B
160
Digikey
R5, R6, R7, R8, R9, R10, R11, R12 +24

Driver 40mm atmega v0p4 design files

The KiCad project lives in the floesche/LED-Display_G4_Hardware_Driver repository on GitHub; these links point at the commit this page was built from.

Driver 40mm atmega v0p4: common questions

What microcontroller does the Driver 40mm atmega v0p4 use?

The Driver 40mm atmega v0p4 is built around the ATMEGA328P-MUR, from the AVR/Arduino family.

How big is the Driver 40mm atmega v0p4 PCB?

The Driver 40mm atmega v0p4 measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Driver 40mm atmega v0p4?

88 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Driver 40mm atmega v0p4 design files?

From the floesche/LED-Display_G4_Hardware_Driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Driver 40mm atmega v0p4 design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which floesche chose for the repository.

Can I test firmware for the Driver 40mm atmega v0p4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in LED-Display_G4_Hardware_Driver

Earlier revisions in the repo: driver_40mm_atmega_v0p3, driver_40mm_atmega_v0p2, driver_40mm_atmega_v0p1, driver_40mm_atmega

Similar boards