HardLabs

ESP32-C3-DevKit-RUST-1

florentdenis·Crimpdeq-Alt·hardware/pcb/crimpdeq_alt/crimpdeq_alt.kicad_pcb

ESP32-C3-DevKit-RUST-1 PCB layout, top view — open source ESP32 board by florentdenis
Simulate this board

About the ESP32-C3-DevKit-RUST-1 PCB

ESP32-C3-DevKit-RUST-1 is an open source ESP32 PCB design by florentdenis, published on GitHub under the Custom license license. It is a 2-layer board measuring 50.8 × 33 mm, with 58 components from 32 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AD7124-4BCPZ, LTC4063EDD-PBF and MAX77533AEWC+. By type, the board carries 23 capacitors, 18 resistors, 7 diodes, 4 ICs, 3 connectors and 2 switches.

Main components on the ESP32-C3-DevKit-RUST-1

AD7124-4BCPZLTC4063EDD-PBFESP32-C3-MINI-1MAX77533AEWC+

ESP32-C3-DevKit-RUST-1 bill of materials (BOM)

58 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AD7124-4BCPZ
U1
1
LTC4063EDD-PBF
U2
1
ESP32-C3-MINI-1
U3
1
MAX77533AEWC+
U9
1
USB4105-GF-A
J1
1
S2B-PH-K-SLFSN
J2
1
S4B-ZR-3.4(LF)(SN)
S4B-ZR-3.4_LF__SN_
J3
2
SW_Push
SW1, SW2
1
SZESD5Z3.3T1G
D1
2
LED
D2, D3
1
SS1040_R1_00001
D6
3
SMCJ5.0CA/TR13
D7, D8, D9
1
74479320165247
4.7u 2A
L1
1
100UF
100uF
C1
3
1uF 10V
C8, C10, C32
5
100nF 10V
C9, C23, C26, C27, C41
1
10nF 10V
C11
4
22uF 10V
C15, C18, C19, C20
1
0.22uF 10V
C16
3
2.2uF 10V
C17, C28, C30
Show 12 more
QtyPartRefs
3
100pF 25V
C21, C24, C25
1
4.7uF 10V
C22
1
2.2uF 16V
C29
2
5k1R 1%
R4, R6
2
0R 1%
R5, R7
5
10kR 1%
R8, R13, R16, R19, R20
1
3.24kR 1%
R9
1
470R 1%
R10
1
100kR 1%
R11
4
1kR 1%
R14, R15, R18, R25
1
274kR 1%
R17
1
0R 1%
R21

ESP32-C3-DevKit-RUST-1 design files

The KiCad project lives in the florentdenis/Crimpdeq-Alt repository on GitHub; these links point at the commit this page was built from.

ESP32-C3-DevKit-RUST-1: common questions

What microcontroller does the ESP32-C3-DevKit-RUST-1 use?

The ESP32-C3-DevKit-RUST-1 is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the ESP32-C3-DevKit-RUST-1 PCB?

The ESP32-C3-DevKit-RUST-1 measures 50.8 × 33 mm, has 2 copper layers and is 1.600198 mm thick.

How many components are on the ESP32-C3-DevKit-RUST-1?

58 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-C3-DevKit-RUST-1 design files?

From the florentdenis/Crimpdeq-Alt repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-C3-DevKit-RUST-1 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ESP32-C3-DevKit-RUST-1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Crimpdeq-Alt

Similar boards