RP2040-Drone
Flynsky·RP2040-Drone·Hardware/V2/DroneV2.kicad_pcb
About the RP2040-Drone PCB
RP2040-Drone is an open source PCB design by Flynsky, published on GitHub. It is a 2-layer board measuring 57.2 × 38.1 mm, with 82 components from 51 distinct parts.
Other key parts include the LM3940IMP-3.3/NOPB, MCP73831T-2ACI/OT and MPU-6050. By type, the board carries 27 capacitors, 23 resistors, 9 connectors, 4 transistors, 4 diodes and 3 ICs.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
A simple Quadrocoper based on the RP2040

Main components on the RP2040-Drone
RP2040-Drone bill of materials (BOM)
82 components, 51 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3940IMP-3.3/NOPB LM3940IMP-3.3_NOPB | SOT230P700X180-4N | IC1 |
| 1 | MCP73831T-2ACI/OT MCP73831T-2ACI_OT | SOT95P270X145-5N | IC2 |
| 1 | MPU-6050 | MPU6050 | IC3 |
| 4 | SQ2310ES-T1_GE3 | SOT95P237X112-3N | Q1, Q2, Q3, Q4 |
| 1 | ABM8G-12.000MHZ-4Y-T3 | ABM8G | Y1 |
| 1 | 47346-1001 Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | GSB1C41110SSHR | GSB1C41110SSHR | J2 |
| 3 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J3, J5, J6 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | NEOPIXEL | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | CONN_01X02_PIN Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J8 |
| 1 | CONN_02X04_ODD_EVEN Conn_01x04 | PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Left | J10 |
| 2 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | Bat_3.7V1, Bat_3.7V2 |
| 1 | W25Q128JVS | SOIC127P790X216-8N | FLA1 |
| 2 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | OLED1, OLED2 |
| 2 | THB001P | THB001P | S1, S2 |
| 1 | 435441019830 | 435441019830 | S_BOOT1 |
| 1 | SC0914(7) SC0914_7_ | QFN40P700X700X90-57N-D | uC1 |
| 2 | APTD2012LCGCK | LEDC2012X120N | charge1, uC2 |
| 4 | SS34 | DIOM8059X256N | D1, D2, D3, D4 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10U 2u2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 15P 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 15P 15p 5% | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 10U 15p 5% | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 6 | 100N 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C7, C9, C11, C14 |
| 2 | 0.1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C10 |
| 3 | 100N 2u2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C15 |
| 1 | 100N 0.47uF | C_0805_2012Metric | C16 |
| 1 | 10U min. 4.7uF | C_0805_2012Metric | C17 |
| 1 | 33uF | C_0805_2012Metric | C18 |
| 1 | min. 4.7uF | C_0805_2012Metric | C19 |
| 4 | 100n | C_0402_1005Metric | C20, C21, C22, C23 |
| 1 | 10NF 10nF | C_0402_1005Metric | C24 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric | C25, C27 |
| 1 | 2.2NF 2.2nF | C_0402_1005Metric | C26 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R22, R23 |
| 1 | 10k but unessesary | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | no fit | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 1k 1% | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 10K 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 100 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 10K 2kOhm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 2KOHM 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 1,5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 2 | 100 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R17 |
| 3 | 10K 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R18, R19 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 3 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R20, R21 |
RP2040-Drone design files
The KiCad project lives in the Flynsky/RP2040-Drone repository on GitHub; these links point at the commit this page was built from.
RP2040-Drone: common questions
How big is the RP2040-Drone PCB?
The RP2040-Drone measures 57.2 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RP2040-Drone?
82 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RP2040-Drone design files?
From the Flynsky/RP2040-Drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RP2040-Drone design in my own project?
The repository has no license, so all rights stay with Flynsky. Use it as a reference, and ask the author before reusing the design.
Earlier revisions in the repo: Drone
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979