HardLabs

ECET-430-Group-ACM-Project

Fmb7k·ECET-430-Group-ACM-Project

ECET-430-Group-ACM-Project PCB layout, top view — open source AVR/Arduino board by Fmb7k

About the ECET-430-Group-ACM-Project PCB

ECET-430-Group-ACM-Project is an open source AVR/Arduino PCB design by Fmb7k, published on GitHub. It is a 2-layer board measuring 121.8 × 78.3 mm, with 26 components from 23 distinct parts.

Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the LM386 and NCP1117-5.0_SOT223. By type, the board carries 6 capacitors, 3 ICs, 3 connectors, 3 resistors, 2 diodes and 1 crystal.

Main components on the ECET-430-Group-ACM-Project

LM386ATmega328-PNCP1117-5.0_SOT223

ECET-430-Group-ACM-Project bill of materials (BOM)

26 components, 23 distinct parts.

QtyPartRefs
1
LM386
U1
1
ATmega328-P
U2
1
NCP1117-5.0_SOT223
U3
1
16MHz
Y1
1
Barrel_Jack_Switch
J1
1
AVR-ISP-6
J2
1
HD44780 16x2 LCD
J3
2
47u
PC1, PC2
1
250u
PC3
2
10K Pot
RV1, RV2
1
Speaker
ST171
1
SW_DPST
SW2
1
1N4148WT
D1
1
1N4007
D2
1
700u
L1
1
12-120 pF
C1
1
4.7n
C2
1
100n
C3
1
.05u
C4
2
220p
C5, C6
Show 3 more
QtyPartRefs
1
100k
R1
1
10
R2
1
220
R4

ECET-430-Group-ACM-Project design files

The KiCad project lives in the Fmb7k/ECET-430-Group-ACM-Project repository on GitHub; these links point at the commit this page was built from.

ECET-430-Group-ACM-Project: common questions

What microcontroller does the ECET-430-Group-ACM-Project use?

The ECET-430-Group-ACM-Project is built around the ATmega328-P, from the AVR/Arduino family.

How big is the ECET-430-Group-ACM-Project PCB?

The ECET-430-Group-ACM-Project measures 121.8 × 78.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ECET-430-Group-ACM-Project?

26 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the ECET-430-Group-ACM-Project design files?

From the Fmb7k/ECET-430-Group-ACM-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ECET-430-Group-ACM-Project design in my own project?

The repository has no license, so all rights stay with Fmb7k. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ECET-430-Group-ACM-Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards