48 open source boards using the NCP1117-5.0_SOT223
Real designs built with the NCP1117-5.0_SOT223, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sduino uno
roybaer
68.6 × 53.3 mm45 parts2LNo license18STM32
Sduino mb
roybaer
101.6 × 53.3 mm48 parts2LNo license4RP2040/RP2350
RaspberryPi-Uno
NeilKhera
68.6 × 53.3 mm62 parts2LCustom license2RP2040/RP2350
EIT-Machine
Alberta2514640
200 × 130 mm356 parts4LNo license1AVR/Arduino
Master old
formicidae-tracker
100 × 100 mm182 parts2LNo license1- schematic only · 60 partsAVR/Arduino
Kicad
harry123180
60 partsNo license1 STM32
Arachne
TheColonelYoung
100 × 70 mm265 parts2LGPL-3.00AVR/Arduino
Shield offset
apmarshall3
83.2 × 78.1 mm125 parts4LNo license0STM32
KiCAD Test
shayesMEL
170 × 120 mm92 parts2LNo license03D PrEBo
TheColonelYoung
100 × 84 mm71 parts2LCC-BY-SA-4.00AVR/Arduino
ArduinoEquipped
kaustubh850
69.8 × 53.3 mm65 parts2LNo license0AVR/Arduino
ORA Control Board Rev 1
gtrupiano
100 × 60 mm65 parts2LNo license0AVR/Arduino
ORA Control Board Rev 1
oaklandrobotics
100 × 60 mm65 parts2LNo license0AVR/Arduino
Stepper motor controller
abdallah-yasser
60 × 47 mm63 parts4LMIT0AVR/Arduino
Arduino-Uno-R3-PCB-Design
daviddzekwer
68.6 × 53.3 mm60 parts2LNo license0AVR/Arduino
NEMA23-Stepper-Controller
Davey09
61.2 × 52.1 mm60 parts2LNo license0AVR/Arduino
Custom-Arduiono-Board
marrynrv
68.6 × 53.3 mm57 parts2LNo license0AVR/Arduino
Arduino-UNO-Clone
swapnil-maurya
68.6 × 53.4 mm51 parts2LNo license0AVR/Arduino
Wrenchboard
Rowninator
68.6 × 53.3 mm51 parts2LNo license0AVR/Arduino
The-Armadillo
sbbxiii
60 × 60 mm49 parts4LMIT0AVR/Arduino
Board-Stupid
reading-hackspace
68.6 × 53.4 mm49 parts2LNo license0AVR/Arduino
LeonardoBB
asukiaaa
48 × 58 mm40 parts2LNo license0AVR/Arduino
UNOvx
bitomaxsp
72 × 54 mm37 parts2LMIT0AVR/Arduino
ECET-430-Group-ACM-Project
Fmb7k
121.8 × 78.3 mm26 parts2LNo license0PBC TP Final - Tarjeta Expación GEO HCAL
brengi
60 × 96 mm141 parts2LNo license7AVR/Arduino
Shield
apmarshall3
83.2 × 69.2 mm82 parts2LNo license0AVR/Arduino
ORA Control Board Rev 1.1
gtrupiano
100 × 60 mm65 parts2LNo license0AVR/Arduino
ORA CONTROLBOARD REV1
oaklandrobotics
100 × 60 mm65 parts2LNo license0RP2040/RP2350
Face
Aidan-McNay
101.5 × 52 mm27 parts2LNo license0AVR/Arduino
Arduino Mega 2560
sabogalc
101.6 × 53.3 mm60 parts2LWTFPL93AVR/Arduino
ORA Control Board Rev 2
oaklandrobotics
100 × 52.5 mm61 parts2LNo license0AVR/Arduino
ORA Control Board Rev 2
gtrupiano
100 × 52.5 mm61 parts2LNo license0AVR/Arduino
Arduino Uno (Type-C)
sabogalc
68.6 × 53.3 mm51 parts2LWTFPL93RP2040/RP2350
Power Supply Brain
cdagher
59 × 84 mm101 parts4LMIT0AVR/Arduino
ORA Control Board Rev 2.1
gtrupiano
100 × 52.5 mm60 parts2LNo license0AVR/Arduino
ORA Control Board Rev 2.1
oaklandrobotics
100 × 52.5 mm60 parts2LNo license0
How designs wire the NCP1117-5.0_SOT223
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the NCP1117-5.0_SOT223 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 18 of 30 designs, most often 10 µF (then 100 nF).
- The VO pin has a decoupling capacitor on 15 of 30 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 5V 83% |
|
| VIpin 3 | Connected to: 12V 60% · a signal 37% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oak by tpcarlson, Arduino Leonardo by sabogalc, Sduino uno by roybaer and PBC TP Final - Tarjeta Expación GEO HCAL by brengi.
The NCP1117-5.0_SOT223 in open source designs
The gallery holds 48 open source boards using the NCP1117-5.0_SOT223 from 31 GitHub repositories; a typical one measures about 68.6 × 53.4 mm and carries around 60 components.
87% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Oak by tpcarlson.
Parts used alongside the NCP1117-5.0_SOT223
Microcontrollers on boards using the NCP1117-5.0_SOT223
What boards using the NCP1117-5.0_SOT223 are built for
NCP1117-5.0_SOT223: common questions
Where can I find a NCP1117-5.0_SOT223 reference design?
Each of the 48 boards on this page is a real design using the NCP1117-5.0_SOT223. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NCP1117-5.0_SOT223 VI pin?
The VI pin has a decoupling capacitor on 18 of 30 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 30 open source designs using the NCP1117-5.0_SOT223.
What decoupling capacitors do designs use on the NCP1117-5.0_SOT223 VO pin?
The VO pin has a decoupling capacitor on 15 of 30 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 30 open source designs using the NCP1117-5.0_SOT223.
What parts are used alongside the NCP1117-5.0_SOT223?
The LP2985-3.3, NCP1117-3.3_SOT223, LMV358IDGKR, ATMEGA16U2-MU and CH340G appear in the most repositories here.
Which microcontrollers do boards using the NCP1117-5.0_SOT223 use?
Most are built on AVR/Arduino (32), RP2040/RP2350 (7) and STM32 (6).
How big is a typical board using the NCP1117-5.0_SOT223?
The median is 68.6 × 53.4 mm, and 87% are two-layer designs.
What is the most popular open source board using the NCP1117-5.0_SOT223?
By GitHub stars, Oak by tpcarlson, with 106 stars.
Can I simulate one of these boards using the NCP1117-5.0_SOT223 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.