HardLabs

Aki300yenLCD-raspico2w

fnc765·aki300yenLCD-raspico2w·kicad/pico_lta042b010f_carrier.kicad_pcb

Aki300yenLCD-raspico2w PCB layout, top view — open source Raspberry Pi board by fnc765

About the Aki300yenLCD-raspico2w PCB

Aki300yenLCD-raspico2w is an open source Raspberry Pi PCB design by fnc765, published on GitHub. It is a 2-layer board measuring 100 × 52 mm, with 24 components from 20 distinct parts.

Its main chip is the SC1633, from the Raspberry Pi family. Other key parts include the MC34063AD. By type, the board carries 6 resistors, 5 diodes, 5 capacitors, 3 connectors, 2 ICs and 1 inductor.

Main components on the Aki300yenLCD-raspico2w

SC1633MC34063AD

Aki300yenLCD-raspico2w bill of materials (BOM)

24 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SC1633
RaspberryPi_Pico_2W
Raspberry Pi Foundation
U1
1
MC34063AD
TAEJIN TECHNOLOGY
U3
1
LTA042B010F_FFC36
LTA042B010F_FFC_36P_0.5mm
J1
1
A295-CTRPB-1
USB-C 5V INPUT
Chang Enn Co., Ltd.
J2
1
PH-1X2SG
CCFL_INVERTER_13V8
Chang Enn
J3
1
TSR-065-103-R
10k_CONTRAST_TRIM
SUNTAN TECHNOLOGY CO LTD
RV1
1
AE-MICRO-SD-DIP
SD1
3
1N5819
WUXI XUYANG ELECTRONICS
D4, D6, D7
1
OSG5TA3Z74A
GREEN LED 3mm
OptoSupply
D5
1
OSR5JA3Z74A
RED LED 3mm
OptoSupply
D8
1
NR10050T101M
100uH
Taiyo Yuden
L1
1
35ZLH220MEFCCT8X11.5
220uF 35V
Rubycon
C6
1
RDE5C1H471J0P1H03B
470pF 50V C0G
Murata
C7
1
35PX47MEFC5X11
47uF 35V
Rubycon
C8
1
50PX10MEFC5X11
10uF 50V
Rubycon
C9
1
50PX10MEFC5X11
10uF 50V (+ to GND)
Rubycon
C11
1
MFU100F0R47B
0.47R 1%
FAITHFUL LINK INDUSTRIAL CORP.
R7
1
MFS25F200RB
200 1%
FAITHFUL LINK INDUSTRIAL CORP.
R8
3
MF25B10KBD
10k 0.1%
FAITHFUL LINK INDUSTRIAL CORP.
R9, R11, R16
1
MF25B1KBD
1k 0.1%
FAITHFUL LINK INDUSTRIAL CORP.
R10

Aki300yenLCD-raspico2w design files

The KiCad project lives in the fnc765/aki300yenLCD-raspico2w repository on GitHub; these links point at the commit this page was built from.

Aki300yenLCD-raspico2w: common questions

What microcontroller does the Aki300yenLCD-raspico2w use?

The Aki300yenLCD-raspico2w is built around the SC1633, from the Raspberry Pi family.

How big is the Aki300yenLCD-raspico2w PCB?

The Aki300yenLCD-raspico2w measures 100 × 52 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aki300yenLCD-raspico2w?

24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aki300yenLCD-raspico2w design files?

From the fnc765/aki300yenLCD-raspico2w repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aki300yenLCD-raspico2w design in my own project?

The repository has no license, so all rights stay with fnc765. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aki300yenLCD-raspico2w without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards