VORTAC YOLO

FoCTow·ToolchangerDevelopment·PCB/VORTAC/KiCAD/VORTAC_YOLO/VORTAC_YOLO.kicad_pcb

VORTAC YOLO PCB layout, top view — open source STM32 board by FoCTow

About the VORTAC YOLO PCB

VORTAC YOLO is an open source STM32 PCB design by FoCTow, published on GitHub. It is a 4-layer board measuring 68.5 × 24.7 mm, with 13 components from 12 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the TMC2209-LA and SN65HVD232DR. By type, the board carries 4 connectors, 3 ICs, 2 resistors, 1 diode, 1 inductor and 1 capacitor.

From the project

Overcomplicated 3D Printer Design

Main components on the VORTAC YOLO

VORTAC YOLO bill of materials (BOM)

13 components, 12 distinct parts.

QtyPartRefs
1
TMC2209-LA
IC1
1
STM32F103C8Tx
U2
1
SN65HVD232DR
U6
1
Molex Micro Fit 3.0
J2
1
918-418K2023S40001
J14
1
STEPPER
J15
1
IO
J16
1
8MHz
HSE1
1
NeoPixel_THT
D7
1
10uH
L2
1
100uF 35V
C34
2
0.1R 1%
R30, R34

VORTAC YOLO design files

The KiCad project lives in the FoCTow/ToolchangerDevelopment repository on GitHub; these links point at the commit this page was built from.

VORTAC YOLO: common questions

What microcontroller does the VORTAC YOLO use?

The VORTAC YOLO is built around the STM32F103C8Tx, from the STM32 family.

How big is the VORTAC YOLO PCB?

The VORTAC YOLO measures 68.5 × 24.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the VORTAC YOLO?

13 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the VORTAC YOLO design files?

From the FoCTow/ToolchangerDevelopment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the VORTAC YOLO design in my own project?

The repository has no license, so all rights stay with FoCTow. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VORTAC YOLO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ToolchangerDevelopment

Similar boards