VORTAC REV1

FoCTow·ToolchangerDevelopment·PCB/VORTAC/KiCAD/VORTAC_REV1/VORTAC_REV1.kicad_pcb

VORTAC REV1 PCB layout, top view — open source STM32 board by FoCTow

About the VORTAC REV1 PCB

VORTAC REV1 is an open source STM32 PCB design by FoCTow, published on GitHub. It is a 4-layer board measuring 39.2 × 33.4 mm, with 75 components from 36 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TMC2209-LA, TLV73333PDBV, EE-SX4320, AS5047D and AP63205WU. By type, the board carries 33 capacitors, 21 resistors, 8 ICs, 4 connectors, 2 switches and 2 LEDs.

From the project

Overcomplicated 3D Printer Design

Main components on the VORTAC REV1

VORTAC REV1 bill of materials (BOM)

75 components, 36 distinct parts.

QtyPartRefs
1
TMC2209-LA
IC1
1
TLV73333PDBV
U1
1
STM32F103C8T6
U2
1
EE-SX4320
U3
1
AS5047D
U5
1
AP63205WU
U6
1
EE-SX4350
U7
1
TJA1044GTK/3Z
U8
1
8MHz
Y1
1
DEBUG
J1
1
Conn_02x02_Odd_Even
J3
1
918-418K2023S40001
J14
1
STEPPER
J15
1
Boot
SW1
1
Reset
SW2
2
SK6812SIDE-A-RVS
LED1, LED2
1
D_Schottky
D5
1
LED_Small
D6
1
Common Choke
L1
1
4.7uH
L3
Show 16 more
QtyPartRefs
4
470pF 100V
C1, C4, C6, C9
18
0.1uF 50V
C2, C10, C13, C15, C17, C19, C21, C24 +10
2
1uF 16V
C3, C8
2
4.7uF 50V
C22, C40
1
22nF 50V
C23
1
10uF 50V
C27
2
22uF 16V
C30, C31
1
100uF 35V
C34
2
16pF 50V
C42, C43
3
1K
R1, R13, R15
7
10K
R2, R8, R9, R11, R12, R14, R32
2
5.1K
R3, R4
2
330R
R5, R6
2
115R
R7, R10
2
0.68R 1%
R30, R34
3
22R
R35, R36, R38

VORTAC REV1 design files

The KiCad project lives in the FoCTow/ToolchangerDevelopment repository on GitHub; these links point at the commit this page was built from.

VORTAC REV1: common questions

What microcontroller does the VORTAC REV1 use?

The VORTAC REV1 is built around the STM32F103C8T6, from the STM32 family.

How big is the VORTAC REV1 PCB?

The VORTAC REV1 measures 39.2 × 33.4 mm, has 4 copper layers and is 1 mm thick.

How many components are on the VORTAC REV1?

75 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the VORTAC REV1 design files?

From the FoCTow/ToolchangerDevelopment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the VORTAC REV1 design in my own project?

The repository has no license, so all rights stay with FoCTow. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VORTAC REV1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ToolchangerDevelopment

Earlier revisions in the repo: VORTAC

Similar boards