74 open source boards using the TMC2209-LA
Real designs built with the TMC2209-LA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1kSTM32
Ethersweep
Neumi
79 × 38 mm97 parts2LMIT587STM32
Huvud
bondus
42 × 42 mm116 parts4LGPL-3.0373STM32
Leviathan
MotorDynamicsLab
170 × 100 mm406 parts4LGPL-3.0121RP2040/RP2350
Starfish
wntrblm
100 × 100 mm220 parts4LCC-BY-NC-4.0111STM32
Buddy board-MINI
prusa3d
105 × 70 mm350 parts6LNo license64Tmc2209 devboard
Neumi
69 × 53.8 mm35 parts2LNo license37RP2040/RP2350
Starfish
grokicad
100 × 100 mm220 parts4LNo license26STM32
Corevus g
calithameridi
135 × 75 mm427 parts4LNo license25RP2040/RP2350
StealthBurner CAN Main
CharlieYu4994
53 × 40 mm87 parts4LNo license10RP2040/RP2350
Hardware
seedhammer
205.3 × 78 mm172 parts4LUnlicense9STM32
Buddy
bobc
105 × 70 mm350 parts6LMIT7STM32
Longboi
KungfuPancake
358 × 40 mm285 parts4LApache-2.07SilentStepStick
malloc-19
15.2 × 20.3 mm22 partsNo license4STM32
CM4IOv5
DevCyclonekitten
160 × 90 mm137 parts4LGPL-3.02STM32
VORTAC Backup
FoCTow
46 × 52.4 mm125 parts4LNo license2ESP32
Partial Drawer Controller v1
Robast-GmbH
408.7 × 50 mm556 parts4LMIT1PaneledKit
williamthayer
93.6 × 94.4 mm226 parts2LNo license1ESP32
Balancing cam
NEOgHacking
50 × 50 mm116 parts4LNo license1STM32
ZdeHav-Changer
iZboxo
35 × 35 mm98 parts4LMIT1Microchip SAM
Axis Basic
andrew153d
42 × 42 mm67 parts4LNo license1STM32
Stomper
JoKhannn
40.3 × 39.2 mm64 parts4LNo license1STM32
OpenWheel
xlazam01
26.9 × 35.3 mm57 parts2LGPL-3.01STM32
MX Buddy Board
MX-RESEARCH
115 × 70 mm351 parts6LNo license0STM32
Buddy
sl1pkn07
105 × 70 mm350 parts6LNo license0RP2040/RP2350
Starfish
clintonimaroo
100 × 100 mm220 parts4LNo license0STM32
Solenoid board
SamsonChau
146.1 × 63.5 mm206 parts2LNo license0ESP32
Stepper synth
udu3324
266.7 × 81 mm182 parts2LGPL-3.00RP2040/RP2350
Toolhead Board
chpaxson
75 × 75 mm146 parts4LNo license0ESP32
DrumTime
M-Mrk
100 × 100 mm120 parts2LGPL-3.00ESP32
StartrackerOrion-Hardware
NBER08
86.1 × 71.9 mm96 parts4LMIT0RP2040/RP2350
Rp2350-dev board
ahsanu123
276.8 × 270.4 mm89 parts2LMIT0ESP32
Pantiltslide integrated
AMOVFC
206.1 × 161.6 mm86 parts4LNo license0AVR/Arduino
NEMA23-Stepper-Controller
Davey09
61.2 × 52.1 mm60 parts2LNo license0STM32
Ggsmdriver
gustavgaston
55 × 45 mm59 parts4LNo license0AVR/Arduino
The-Armadillo
sbbxiii
60 × 60 mm49 parts4LMIT0
How designs wire the TMC2209-LA
Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the TMC2209-LA connects to, and the resistors, capacitors and other passives placed on it.
- The VS pins have a decoupling capacitor on 35 of 36 designs, most often 100 nF (then 10 µF).
- The CPO pin has a series capacitor on 34 of 36 designs, most often 22 nF (then 100 nF).
- The CPI pin has a series capacitor on 34 of 36 designs, most often 22 nF (then 100 nF).
- The 5VOUT pin has a capacitor to GND on 33 of 36 designs, most often 4.7 µF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENNpin 2 | Connected to: The microcontroller 61% |
|
| GNDpin 3, 18 | Connected to: GND 96% | — |
| CPOpin 4 | Connected to: Signal 94% |
|
| CPIpin 5 | Connected to: Signal 94% |
|
| VCPpin 6 | Connected to: Signal 97% |
|
| 5VOUTpin 8 | Connected to: Signal 75% · 5V 17% |
|
| MS1_AD0pin 9 | Connected to: GND 61% · a signal 25% | — |
| MS2_AD1pin 10 | Connected to: GND 64% · a signal 25% | — |
| INDEXpin 12 | Connected to: Not connected 67% · a signal 33% | — |
| CLKpin 13 | Connected to: GND 81% · a signal 17% | — |
| PDN_UARTpin 14 | Connected to: The microcontroller 69%, TMC2209-LA 31% |
|
| VCC_IOpin 15 | Connected to: 3.3V 97% |
|
| VREFpin 17 | Connected to: Not connected 61% · VREF 17% · a signal 17% | — |
| VSpin 22, 28 | Connected to: 24V 72% · a signal 25% |
|
| BRApin 23 | Connected to: Signal 92% |
|
| BRBpin 27 | Connected to: Signal 92% |
|
| GND_29pin 29 | Connected to: GND 94% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Simple by theacodes, Ethersweep by Neumi, CanHat by bondus and Leviathan by MotorDynamicsLab.
The TMC2209-LA in open source designs
The gallery holds 74 open source boards using the TMC2209-LA from 40 GitHub repositories; a typical one measures about 78 × 60 mm and carries around 87 components.
62% use four copper layers or more, and 35% carry an open source license.
The most starred is Starfish by theacodes.
Parts used alongside the TMC2209-LA
Microcontrollers on boards using the TMC2209-LA
What boards using the TMC2209-LA are built for
TMC2209-LA: common questions
Where can I find a TMC2209-LA reference design?
Each of the 74 boards on this page is a real design using the TMC2209-LA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TMC2209-LA VS pin?
The VS pins have a decoupling capacitor on 35 of 36 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 38 open source designs using the TMC2209-LA.
How is the TMC2209-LA CPO pin connected?
The CPO pin has a series capacitor on 34 of 36 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 38 open source designs using the TMC2209-LA.
How is the TMC2209-LA CPI pin connected?
The CPI pin has a series capacitor on 34 of 36 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 38 open source designs using the TMC2209-LA.
What parts are used alongside the TMC2209-LA?
The AMS1117-3.3, RP2040, USBLC6-2SC6, 74HC2G34GW,125 and MAX3078EESA appear in the most repositories here.
Which microcontrollers do boards using the TMC2209-LA use?
Most are built on STM32 (28), RP2040/RP2350 (14), ESP32 (13) and AVR/Arduino (2).
How big is a typical board using the TMC2209-LA?
The median is 78 × 60 mm, and 38% are two-layer designs.
What is the most popular open source board using the TMC2209-LA?
By GitHub stars, Starfish by theacodes, with 1,143 stars.
Can I simulate one of these boards using the TMC2209-LA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.