HardLabs

Gateway esp32

forg3·NibasRockBar·hardware/kicad/gateway_esp32/gateway_esp32.kicad_pcb

Gateway esp32 PCB layout, top view — open source ESP32 board by forg3
Simulate this board

About the Gateway esp32 PCB

Gateway esp32 is an open source ESP32 PCB design by forg3, published on GitHub. It is a 2-layer board measuring 62 × 36 mm, with 4 components from 4 distinct parts.

Its main chip is the ESP32-DevKitC-32E, from the ESP32 family. By type, the board carries 1 IC, 1 connector, 1 switch and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

Sistema de pulseira eletrônica (NFC + BLE) para identificação de clientes e localização indoor no salão, integrado ao sistema de caixa Deli. Atendimento continua 100% humano — garçom tira o pedido, equipe serve bebidas e a cozinha prepara os pratos. A pulseira só identifica o cli

Sistema de pulseira eletrônica (NFC + BLE) para identificação de clientes e localização indoor no salão, integrado ao sistema de caixa Deli. Atendimento continua 100% humano — garçom tira o pedido, equipe serve bebidas e a cozinha prepara os pratos. A pulseira só identifica o cliente e ajuda a equipe a localizá-lo mais rápido.

1. Check-in — cliente recebe uma pulseira livre; o sistema abre a comanda no Deli. 2. Pedido — garçom lê a pulseira (NFC) e lança o pedido na comanda certa, em qualquer mesa. 3. Localização — o app do garçom mostra a área do salão onde cada comanda está (BLE). 4.…

Main components on the Gateway esp32

ESP32-DevKitC-32E

Gateway esp32 bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DevKitC-32E
U1
1
PinHeader_1x02_P2.54mm_Vertical
J1
1
SW_PUSH_6mm
SW1
1
R_0603_1608Metric
R1

Gateway esp32 design files

The KiCad project lives in the forg3/NibasRockBar repository on GitHub; these links point at the commit this page was built from.

Gateway esp32: common questions

What microcontroller does the Gateway esp32 use?

The Gateway esp32 is built around the ESP32-DevKitC-32E, from the ESP32 family.

How big is the Gateway esp32 PCB?

The Gateway esp32 measures 62 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gateway esp32?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Gateway esp32 design files?

From the forg3/NibasRockBar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Gateway esp32 design in my own project?

The repository has no license, so all rights stay with forg3. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gateway esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in NibasRockBar

Similar boards