HardLabs

12V5VDCDC

formicidae-tracker·hardware·ecad/common/12V5VDCDC.kicad_pcb

12V5VDCDC PCB layout, top view — open source board by formicidae-tracker

About the 12V5VDCDC PCB

12V5VDCDC is an open source PCB design by formicidae-tracker, published on GitHub. It is a 2-layer board measuring 21.8 × 7.8 mm, with 11 components from 10 distinct parts.

Other key parts include the MIC4680-5.0YM. By type, the board carries 4 capacitors, 3 inductors, 2 resistors, 1 IC and 1 diode.

From the project

Hardware repository for the FORT system

Helios : illumination system, synchronized with framegrabber. Consist of several PCB, the LED boards with an aluminium core, the LED driver to drive the first one , and the Master to dispatch power and connect to the CAN bus Arke: RS-232 board to interface with the can bus. libarke is used to specify the protocol between all boards Zeus: Climate control board that monitor environmental and perform the climate control loop. Celaeno : Nebulizer control board Anemoi : Generic Sensor board with different versions Prometheus: Electric Dispatch board for the FORT * Notus: Heater ofb the ant boxes.

Main components on the 12V5VDCDC

MIC4680-5.0YM

12V5VDCDC bill of materials (BOM)

11 components, 10 distinct parts.

QtyPartRefs
1
MIC4680-5.0YM
MIC4680YM
U4
1
B260-13-F
B260, 60V, 2A
D5
2
BLM18AG471SN1D
500mA Fuse
L1, L3
1
744773168
68uH, 560mA
L2
1
CL31A226KAHNNNE
22uF, 35V
C13
1
T491D477K006AT
470u, 6.3V
C14
1
GPC0603475-10
4u7, 6.3V
C15
1
GPC0603104
100n
C16
1
GPR060315K
15k
R6
1
CRCW06034K87FKEA
4k7
R7

12V5VDCDC design files

The KiCad project lives in the formicidae-tracker/hardware repository on GitHub; these links point at the commit this page was built from.

12V5VDCDC: common questions

How big is the 12V5VDCDC PCB?

The 12V5VDCDC measures 21.8 × 7.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 12V5VDCDC?

11 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the 12V5VDCDC design files?

From the formicidae-tracker/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 12V5VDCDC design in my own project?

The repository has no license, so all rights stay with formicidae-tracker. Use it as a reference, and ask the author before reusing the design.

More boards in hardware