HardLabs

Master old

formicidae-tracker·hardware·ecad/helios/Master/master-old.kicad_pcb

Master old PCB layout, top view — open source AVR/Arduino board by formicidae-tracker
Simulate this board

About the Master old PCB

Master old is an open source AVR/Arduino PCB design by formicidae-tracker, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 182 components from 40 distinct parts.

Its main chip is the ATMEGA16M1-AU, from the AVR/Arduino family. Other key parts include the NCP1117-5.0_SOT223, MCP2561-E/SN, STEF01FTR, ISO7320FC and UA9638. By type, the board carries 60 capacitors, 43 resistors, 29 diodes, 23 ICs, 13 connectors and 8 transistors.

From the project

Hardware repository for the FORT system

Helios : illumination system, synchronized with framegrabber. Consist of several PCB, the LED boards with an aluminium core, the LED driver to drive the first one , and the Master to dispatch power and connect to the CAN bus Arke: RS-232 board to interface with the can bus. libarke is used to specify the protocol between all boards Zeus: Climate control board that monitor environmental and perform the climate control loop. Celaeno : Nebulizer control board Anemoi : Generic Sensor board with different versions Prometheus: Electric Dispatch board for the FORT * Notus: Heater ofb the ant boxes.

Main components on the Master old

NCP1117-5.0_SOT223MCP2561-E/SNATMEGA16M1-AUSTEF01FTRISO7320FCUA9638LM2842YLP3985IM5-5.0/NOPB

Master old bill of materials (BOM)

182 components, 40 distinct parts.

QtyPartRefs
1
NCP1117-5.0_SOT223
U1
1
MCP2561-E/SN
U2
1
ATMEGA16M1-AU
U3
4
STEF01FTR
U4, U9, U14, U19
4
ISO7320FC
U5, U10, U15, U20
4
UA9638
U6, U11, U16, U21
4
LM2842Y
U7, U12, U17, U22
4
LP3985IM5-5.0/NOPB
U8, U13, U18, U23
4
IRF9Z34NPbF
Q1, Q3, Q5, Q7
4
BSS84P
Q2, Q4, Q6, Q8
1
16MHz
Y1
1
MCV 1,5/ 3-G-3,5
J1
7
MCV 1,5/ 2-G-3,5
J2, J3, J4, J5, J7, J9, J11
4
MiniFit JR 5556 08A2
J6, J8, J10, J12
1
M20-8760342
J13
1
1825910-6
SW1
4
10V
D1, D4, D7, D10
4
RED
D2, D5, D8, D11
4
60V, 1A
D3, D6, D9, D12
1
BAT54
D13
Show 20 more
QtyPartRefs
16
5.5V
D14, D15, D16, D17, D18, D19, D20, D21 +8
4
100uH, 0.7A
L1, L2, L3, L4
21
100nF
C1, C2, C4, C5, C6, C9, C10, C11 +13
1
22uF
C3
2
18pF
C7, C8
4
0.22uF, 25V
C12, C21, C30, C39
4
1uF, 50V
C13, C22, C31, C40
8
1uF
C14, C16, C23, C25, C32, C34, C41, C43
4
47uF
C15, C24, C33, C42
8
10nF, 50V
C17, C26, C35, C44, C48, C52, C56, C60
8
47uF, 50V
C46, C47, C50, C51, C54, C55, C58, C59
10
10K
R1, R9, R14, R22, R25, R27, R32, R34 +2
4
249K
R2, R19, R29, R36
8
100K
R3, R8, R12, R13, R18, R26, R33, R40
4
25.5
R4, R23, R30, R37
4
6.81K
R5, R10, R15, R20
4
976
R6, R11, R16, R21
4
301K
R7, R24, R31, R38
4
604
R17, R28, R35, R42
1
1K
R43

Master old design files

The KiCad project lives in the formicidae-tracker/hardware repository on GitHub; these links point at the commit this page was built from.

Master old: common questions

What microcontroller does the Master old use?

The Master old is built around the ATMEGA16M1-AU, from the AVR/Arduino family.

How big is the Master old PCB?

The Master old measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Master old?

182 components, from 40 distinct parts. The full bill of materials is listed on this page.

Where can I download the Master old design files?

From the formicidae-tracker/hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Master old design in my own project?

The repository has no license, so all rights stay with formicidae-tracker. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Master old without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in hardware

Similar boards