HardLabs

12V5VDCDC LDO

formicidae-tracker·hardware·ecad/common/12V5VDCDC_LDO.kicad_pcb

12V5VDCDC LDO PCB layout, top view — open source board by formicidae-tracker

About the 12V5VDCDC LDO PCB

12V5VDCDC LDO is an open source PCB design by formicidae-tracker, published on GitHub. It is a 2-layer board measuring 24.4 × 13.2 mm, with 15 components from 13 distinct parts.

Other key parts include the LP3985IM5-5.0_NOPB and MIC4680YM. By type, the board carries 7 capacitors, 3 inductors, 2 ICs, 2 resistors and 1 diode.

From the project

Hardware repository for the FORT system

Helios : illumination system, synchronized with framegrabber. Consist of several PCB, the LED boards with an aluminium core, the LED driver to drive the first one , and the Master to dispatch power and connect to the CAN bus Arke: RS-232 board to interface with the can bus. libarke is used to specify the protocol between all boards Zeus: Climate control board that monitor environmental and perform the climate control loop. Celaeno : Nebulizer control board Anemoi : Generic Sensor board with different versions Prometheus: Electric Dispatch board for the FORT * Notus: Heater ofb the ant boxes.

Main components on the 12V5VDCDC LDO

LP3985IM5-5.0_NOPBMIC4680YM

12V5VDCDC LDO bill of materials (BOM)

15 components, 13 distinct parts.

QtyPartRefs
1
LP3985IM5-5.0_NOPB
U1
1
MIC4680YM
U4
1
B260, 60V, 2A
D5
2
500mA Fuse
L1, L3
1
68uH, 560mA
L2
2
1u
C1, C2
1
10n
C3
1
22uF, 35V
C13
1
470u, 6.3V
C14
1
4u7, 6.3V
C15
1
100n
C16
1
15k
R6
1
4k32
R7

12V5VDCDC LDO design files

The KiCad project lives in the formicidae-tracker/hardware repository on GitHub; these links point at the commit this page was built from.

12V5VDCDC LDO: common questions

How big is the 12V5VDCDC LDO PCB?

The 12V5VDCDC LDO measures 24.4 × 13.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 12V5VDCDC LDO?

15 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the 12V5VDCDC LDO design files?

From the formicidae-tracker/hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 12V5VDCDC LDO design in my own project?

The repository has no license, so all rights stay with formicidae-tracker. Use it as a reference, and ask the author before reusing the design.

More boards in hardware