LTC1871 Based Boost Controller V2 - Copy
fortuneolose·EE499-FYP·KiCAD PCB Design/LTC1871 KiCAD PCB Revision/LTC1871_Based_Boost_Controller_V2 - Copy.kicad_pcb
About the LTC1871 Based Boost Controller V2 - Copy PCB
LTC1871 Based Boost Controller V2 - Copy is an open source PCB design by fortuneolose, published on GitHub. It is a 2-layer board measuring 60.5 × 42.5 mm, with 38 components from 27 distinct parts.
Other key parts include the LTC1871EMS-7-PBF. By type, the board carries 16 capacitors, 9 resistors, 4 connectors, 3 transistors, 3 diodes and 1 IC.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
EE499 Final Year Project — LTC1871 DC-DC Boost Converter (LTSpice simulation, MATLAB analysis, report iterations)
Design, simulate, build and test a buck/boost DC-DC converter intended for use in robotics and autonomous systems such as factory automation, surveillance platforms, delivery robots, drones and e-mobility applications.
DC-DC converters supply the various voltage rails required by different sub-systems in robotic platforms. This project investigates the key design principles of a switched-mode buck/boost converter, with emphasis on:
Main components on the LTC1871 Based Boost Controller V2 - Copy
LTC1871 Based Boost Controller V2 - Copy bill of materials (BOM)
38 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC1871EMS-7-PBF | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | SI4894BDY | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | DMP3099L | SOT-23 | Q2 |
| 1 | Q_NPN_BEC | SOT-23 | Q4 |
| 1 | J2_OUT | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Proto_1 | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Proto_GND | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Proto_2 | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | J_VIN_OUT | PinHeader_1x02_P2.54mm_Vertical | J_VIN1 |
| 1 | MBR735 | TO-220-2_Vertical | D1 |
| 1 | SS14 | D_SMA | D2 |
| 1 | BZX84 | SOT-23 | D3 |
| 1 | 10µ | L_Coilcraft_XAL6060-XXX | L1 |
| 2 | 100µ | CP_Radial_D8.0mm_P3.50mm | C1, C5 |
| 9 | 22µ | C_1206_3216Metric | C1a1, C1a2, C1a3, C1a4, C1a5, C1a6, C1a7, C6 +1 |
| 2 | 10µ | C_0805_2012Metric | C1b1, C1b2 |
| 1 | 6.8N 6.8n | C_0805_2012Metric | C2 |
| 1 | 100P 100p | C_0805_2012Metric | C3 |
| 1 | 4.7µ | C_0805_2012Metric | C4 |
| 1 | 68.1K 68.1k | R_0805_2012Metric | R1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 56K 56k | R_0805_2012Metric | R2 |
| 1 | 499K 499k | R_0805_2012Metric | R3 |
| 1 | 8.66K 8.66k | R_0805_2012Metric | R4 |
| 1 | 49K 49k | R_0805_2012Metric | R5 |
| 2 | 10K 10k | R_0805_2012Metric | R6, R7 |
| 1 | 5.38K 5.38k | R_0402_1005Metric | R8 |
| 1 | 10K 10k | R_0402_1005Metric | R9 |
LTC1871 Based Boost Controller V2 - Copy design files
The KiCad project lives in the fortuneolose/EE499-FYP repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCAD PCB Design/LTC1871 KiCAD PCB Revision/LTC1871_Based_Boost_Controller_V2 - Copy.kicad_pcb
- SchematicKiCAD PCB Design/LTC1871 KiCAD PCB Revision/LTC1871_Based_Boost_Controller_V2 - Copy.kicad_sch
- BOMKiCAD PCB Design/LTC1871 KiCAD PCB Revision/jlcpcb/production_files/BOM-LTC1871_Based_Boost_Controller_V2 - Copy.csv
LTC1871 Based Boost Controller V2 - Copy: common questions
How big is the LTC1871 Based Boost Controller V2 - Copy PCB?
The LTC1871 Based Boost Controller V2 - Copy measures 60.5 × 42.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LTC1871 Based Boost Controller V2 - Copy?
38 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LTC1871 Based Boost Controller V2 - Copy design files?
From the fortuneolose/EE499-FYP repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LTC1871 Based Boost Controller V2 - Copy design in my own project?
The repository has no license, so all rights stay with fortuneolose. Use it as a reference, and ask the author before reusing the design.
More boards in EE499-FYP
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k