Flora
frandorturtles·flora·hardware/FLORA.kicad_pcb
About the Flora PCB
Flora is an open source ESP32 PCB design by frandorturtles, published on GitHub under the MIT license. It is a 2-layer board measuring 56.4 × 52.9 mm, with 43 components from 29 distinct parts.
Its main chip is the Espressif ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the Sensirion SHT40-AD1B-R2, ams-OSRAM TSL25911FN, Diodes Inc. AP2112K-3.3TRG1 and STMicroelectronics USBLC6-2SC6. By type, the board carries 16 resistors, 9 capacitors, 5 ICs, 4 diodes, 3 connectors and 2 transistors.
From the project
Monitor de plantas con ESP32-C3, en una PCB con forma de flor (5 pétalos, ~56,5 × 53 mm, 2 capas). Mide humedad del suelo (sonda capacitiva), temperatura y humedad del aire (SHT40) y luz (TSL25911), y lo muestra en una pantalla OLED con LEDs de estado y alerta sonora opcional. Al
Monitor de plantas con ESP32-C3, en una PCB con forma de flor (5 pétalos, ~56,5 × 53 mm, 2 capas). Mide humedad del suelo (sonda capacitiva), temperatura y humedad del aire (SHT40) y luz (TSL25911), y lo muestra en una pantalla OLED con LEDs de estado y alerta sonora opcional. Alimentación por USB-C (5 V).
Lista completa de limitaciones: documentation/designreview.md`.

Main components on the Flora
Flora bill of materials (BOM)
43 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Espressif ESP32-C3-WROOM-02-N4 ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02 | U1 |
| 1 | Sensirion SHT40-AD1B-R2 SHT40-AD1B | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U2 |
| 1 | ams-OSRAM TSL25911FN TSL25911FN | AMS_TSL25911FN | U3 |
| 1 | Diodes Inc. AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | STMicroelectronics USBLC6-2SC6 USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | Alpha&Omega AO3401A AO3401A (P-MOSFET) | SOT-23 | Q1 |
| 1 | 2N7002 (onsemi/Nexperia) 2N7002 (N-MOSFET) | SOT-23 | Q2 |
| 1 | GCT USB4105-GF-A USB-C (5V + USB 2.0) | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | JST B3B-PH-K-S Sonda suelo (JST PH 3p: GND VCC AOUT) | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | Socket hembra 1x4 2.54mm OLED I2C (GND VCC SCL SDA) | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Murata PKMCS0909E4000-R1 PKMCS0909E4000-R1 (piezo) | Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | Bourns MF-MSMF050-2 (o equivalente) PTC 500mA hold | Fuse_1206_3216Metric | F1 |
| 1 | C&K KMR2 (o equivalente) USUARIO | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | C&K KMR2 (o equivalente) RESET | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | Littelfuse SMF5.0A (verificar polaridad/tension) TVS 5V | D_SOD-123F | D1 |
| 1 | LED 0603 rojo ROJO | LED_0603_1608Metric | D2 |
| 1 | LED 0603 verde VERDE | LED_0603_1608Metric | D3 |
| 1 | LED 0603 ambar AMBAR | LED_0603_1608Metric | D4 |
| 2 | Samsung CL21A106KPFNNNE 10uF/10V | C_0805_2012Metric | C1, C2 |
| 6 | Samsung CL10B104KB8NNNC 100nF | C_0603_1608Metric | C3, C4, C5, C7, C8, C9 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Samsung CL10A105KB8NNNC 1uF | C_0603_1608Metric | C6 |
| 2 | Yageo RC0603FR-075K1L 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | Yageo RC0603FR-074K7L 4.7k | R_0603_1608Metric | R3, R4 |
| 5 | Yageo RC0603FR-0710KL 10k | R_0603_1608Metric | R5, R6, R7, R8, R9 |
| 3 | Yageo RC0603FR-07330RL 330 | R_0603_1608Metric | R10, R11, R12 |
| 1 | Yageo RC0603FR-07100RL 100 | R_0603_1608Metric | R13 |
| 1 | Yageo RC0603FR-07100KL 100k | R_0603_1608Metric | R14 |
| 1 | Yageo RC0603FR-071KL 1k | R_0603_1608Metric | R15 |
| 1 | Yageo RC0603FR-07470KL 470k | R_0603_1608Metric | R16 |
Flora design files
The KiCad project lives in the frandorturtles/flora repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/FLORA.kicad_pcb
- Schematichardware/FLORA.kicad_sch
- BOMhardware/bom.csv
Flora: common questions
What microcontroller does the Flora use?
The Flora is built around the Espressif ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Flora PCB?
The Flora measures 56.4 × 52.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flora?
43 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flora design files?
From the frandorturtles/flora repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flora design in my own project?
Yes, under the terms of its MIT license, which frandorturtles chose for the repository.
Can I test firmware for the Flora without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k