M18-usb interface
fred314159265·m18-usb-interface·m18-usb-interface-pcb/m18-usb-interface-pcb.kicad_pcb
About the M18-usb interface PCB
M18-usb interface is an open source PCB design by fred314159265, published on GitHub under the Unlicense license. It is a 2-layer board measuring 33 × 46 mm, with 29 components from 18 distinct parts.
Other key parts include the FT234XD, M18 and LTV-817S. By type, the board carries 10 resistors, 6 capacitors, 5 diodes, 4 ICs, 2 transistors and 1 connector.
It belongs with the power & battery and usb & debug tools designs in this gallery.
From the project
Isolated USB-C adapter for Milwaukee M18 battery diagnostics. KiCad design and v1.0 fab files. Software: m18-protocol-rs.
A USB-C board that plugs into a Milwaukee M18 battery so a PC can talk to the pack's diagnostic pins.
Revision v1.0. The M18 connector is on the back of the board.
Read a health report, cell data, and charge history with m18-protocol-rs:
On Linux or macOS, pass the serial device instead, for example /dev/ttyUSB0.
The protocol comes from the reverse engineering in mnh-jansson/m18-protocol. That Python tool works with this board as well.

Main components on the M18-usb interface
M18-usb interface bill of materials (BOM)
29 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT234XD FTDI | WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm | U1 |
| 1 | M18 | M18_Battery_Interface | U2 |
| 2 | LTV-817S Lite-On | SMDIP-4_W9.53mm | U3, U4 |
| 2 | 2N7002 Jiangsu Changjing Electronics Technology Co., Ltd. | SOT-23 | Q1, Q2 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 XKB Connectivity | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | C2286 RX Hubei KENTO Elec | LED_0603_1608Metric | D1 |
| 1 | C2286 TX Hubei KENTO Elec | LED_0603_1608Metric | D2 |
| 2 | SMF26CA hongjiacheng | D_SOD-123F | D3, D4 |
| 1 | SMF12CA hongjiacheng | D_SOD-123F | D5 |
| 1 | C14709 120Ω@100MHz 2A 50mΩ Murata Electronics | L_0603_1608Metric | FB1 |
| 2 | 47PF 47pF Samsung Electro-Mechanics | C_0603_1608Metric | C1, C2 |
| 1 | 10NF 10nF FH (Guangdong Fenghua Advanced Tech) | C_0603_1608Metric | C3 |
| 2 | 100NF 100nF YAGEO | C_0603_1608Metric | C4, C6 |
| 1 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0603_1608Metric | C5 |
| 2 | 27R UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R1, R4 |
| 1 | 22KR 22kR UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R3 |
| 3 | 1k UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R6, R7, R8 |
| 4 | 5.1K 5.1k UNI-ROYAL(Uniroyal Elec) | R_0603_1608Metric | R9, R10, R11, R12 |
M18-usb interface design files
The KiCad project lives in the fred314159265/m18-usb-interface repository on GitHub; these links point at the commit this page was built from.
M18-usb interface: common questions
How big is the M18-usb interface PCB?
The M18-usb interface measures 33 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M18-usb interface?
29 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the M18-usb interface design files?
From the fred314159265/m18-usb-interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the M18-usb interface design in my own project?
Yes, under the terms of its Unlicense license, which fred314159265 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k