HRDW-TINYCAM
About the HRDW-TINYCAM PCB
HRDW-TINYCAM is an open source ESP32 PCB design by Freimor, published on GitHub under the MIT license. It is a board, with 50 components from 30 distinct parts.
Its main chip is the ESP32-P4_MODULE, from the ESP32 family. Other key parts include the IP4234CZ6, ST1S12XX, XC6219B152MR and XC6219B282MR. By type, the board carries 16 capacitors, 14 resistors, 6 connectors, 5 ICs, 3 diodes and 2 transistors.
Main components on the HRDW-TINYCAM
HRDW-TINYCAM bill of materials (BOM)
50 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP4234CZ6 | SC-74-6_1.55x2.9mm_P0.95mm | U1 |
| 1 | ST1S12XX | TSOT-23-5 | U3 |
| 1 | XC6219B152MR | SOT-23-5 | U4 |
| 1 | XC6219B282MR | SOT-23-5 | U5 |
| 1 | ESP32-P4_MODULE | ESP32-P4_MODULE | U6 |
| 2 | SS8050 | SOT-23 | Q5, Q6 |
| 1 | USB_C_Receptacle_USB2.0 | RUICHI_TYPE-C-16PF-020 | J1 |
| 1 | Micro_SD_Card | SDCARD_KLS_L-KLS1-SD114-R | J2 |
| 1 | FFC/FPC 1mm 15pin MIPI-CSI | J3 | |
| 1 | FFC/FPC 1mm 15pin MIPI-DSI | J4 | |
| 1 | ESP32-C6 JTAG | J5 | |
| 1 | Display OSPTEK AM200Q460460LK | Conn_OK-14F024-04 | J6 |
| 2 | SW_Push | SW_SMD_KLS7-TS3401 | SW1, SW2 |
| 1 | 1N5819W | D_SOD-123 | D1 |
| 1 | SS34 | D_SMA_Handsoldering | D2 |
| 1 | CD_LED | LED_0603_1608Metric | D3 |
| 1 | ILHB0805ER121V | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | VLS201610CX-2R2M-1 | IND_VLS201610CX-220M-1 | L1 |
| 1 | 4u7 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 2u2 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 7 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11, C12, C13, C14, C15, C17 |
| 4 | 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16, C18, C19, C20 |
| 2 | 1M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R12 |
| 2 | 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 6 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R18, R19, R20, R21, R22 |
| 1 | 220k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 750 | R_0402_1005Metric | R13 |
| 2 | 10k | R_0402_1005Metric | R14, R23 |
HRDW-TINYCAM design files
The KiCad project lives in the Freimor/HRDW-TINYCAM repository on GitHub; these links point at the commit this page was built from.
- SchematicTinycam_v1/Tinycam_v1.kicad_sch
HRDW-TINYCAM: common questions
What microcontroller does the HRDW-TINYCAM use?
The HRDW-TINYCAM is built around the ESP32-P4_MODULE, from the ESP32 family.
How many components are on the HRDW-TINYCAM?
50 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the HRDW-TINYCAM design files?
From the Freimor/HRDW-TINYCAM repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the HRDW-TINYCAM design in my own project?
Yes, under the terms of its MIT license, which Freimor chose for the repository.
Can I test firmware for the HRDW-TINYCAM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k