14 open source boards using the IP4234CZ6
Real designs built with the IP4234CZ6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
TS65AVR
mohitg11
299.5 × 105.8 mm428 partsNo license119AVR/Arduino
SAMPad
mohitg11
73.2 × 116 mm149 parts2LNo license25Raspberry Pi
PiPtr
jmlzone
101.6 × 141.7 mm379 parts4LNo license8Ch375serial
ChartreuseK
73.8 × 31.1 mm24 parts2LCERN-OHL-W-2.04CyCompute
M2I-HABET
230 × 70 mm29 parts2LNo license3ESP32
Microbot v1.1
Freimor
185 × 58.6 mm190 parts4LNo license0ESP32
VFDClock
GraniteGobbler
80 × 52.7 mm81 parts4LNo license0STM32
Usbsupply
brightcloudy
50 × 50 mm78 parts2LNo license0STM32
KiKit Output
k4i70
115.5 × 90 mm67 parts4LNo license0- schematic only · 50 partsESP32
HRDW-TINYCAM
Freimor
50 partsMIT0 Cnc hmi usb power
tangentaudio
88.9 × 76.2 mm95 parts2LNo license3ESP32
Devboard
Soraxem
26.4 × 41.7 mm18 parts2LCERN-OHL-P-2.01STM32
RPi Car
k4i70
36.5 × 36.5 mm67 parts4LNo license0STM32
RPi Car.recovered.2026-05-17 124818
k4i70
36.5 × 36.5 mm67 parts4LNo license0
How designs wire the IP4234CZ6
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the IP4234CZ6 connects to, and the resistors, capacitors and other passives placed on it.
- The VN pin is tied to GND on 11 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VNpin 2 | Connected to: GND 100% | — |
| VPpin 5 | Connected to: 5V 64% · a signal 27% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TS65AVR by mohitg11, SAMPad by mohitg11, PiPtr by jmlzone and Ch375serial by ChartreuseK.
The IP4234CZ6 in open source designs
The gallery holds 14 open source boards using the IP4234CZ6 from 12 GitHub repositories; a typical one measures about 80 × 58.6 mm and carries around 73 components.
50% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is TS65AVR by mohitg11.
Parts used alongside the IP4234CZ6
Microcontrollers on boards using the IP4234CZ6
What boards using the IP4234CZ6 are built for
IP4234CZ6: common questions
Where can I find a IP4234CZ6 reference design?
Each of the 14 boards on this page is a real design using the IP4234CZ6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the IP4234CZ6 VN pin connected?
The VN pin is tied to GND on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the IP4234CZ6.
What parts are used alongside the IP4234CZ6?
The ATMEGA32U4, ESP32-S3-WROOM-1, PAM2804, ST1S12XX and XC6219B152MR appear in the most repositories here.
Which microcontrollers do boards using the IP4234CZ6 use?
Most are built on ESP32 (4), STM32 (4), AVR/Arduino (2) and Raspberry Pi (1).
How big is a typical board using the IP4234CZ6?
The median is 80 × 58.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the IP4234CZ6?
By GitHub stars, TS65AVR by mohitg11, with 119 stars.
Can I simulate one of these boards using the IP4234CZ6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.